We've haven't had much luck with our UBNT 365 ptmp setups either. Not that they're horrible but it's not giving us optimal performance. Also don't think that you're going to make shots through a grove of trees because it's not going to work. "A" tree maybe but you're pushing it. I've got a neighborhood with about a dozen or less customers on each sector (2 sectors total) and the capacity sucks but i'm also using 5mhz channels.
I have everyone at -70 or better and we're seeing 50% quality 50% capacity. All shots under 1/4 mile. Dear God I hope Cambium comes out with a 450 3.65ghz solution because the options we have right now are downright horrid. -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Wednesday, July 31, 2013 12:32 PM To: WISPA General List Subject: Re: [WISPA] Recommendations for Ubiquiti 3.65 site I have to agree with Gino. I have not had much luck with M365 PTMP setup. PTP is fine but you only have 25MHz to use. Steve Barnes General Manager PCSWIN.com Howard LLC. -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Matt Hoppes Sent: Wednesday, July 31, 2013 12:03 PM To: WISPA General List Subject: Re: [WISPA] Recommendations for Ubiquiti 3.65 site Don't do it?? Where'd that come from. There's really only two models of CPEs in the 3.65 world... the NanoStation and the NanoBridge. The NanoStation will be good for about a mile clear line of site. The NanoBridge will be good a few miles out, and perhaps closer with a small obstruction (bush, single tree, etc). 3GHz requires nearly clear line of site to operate properly. You must register your 3GHz with the FCC and pay the $200 license fee. You must coordinate with grandfathered earth stations if there are any near you. Matt Hoppes Director of Information Technology Indigo Wireless +1 (570) 723-7312 On 7/31/13 11:46 AM, Josh Luthman wrote: > Hey it could work... > > Why are you replacing the gear? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Wed, Jul 31, 2013 at 11:26 AM, Gino Villarini <g...@aeronetpr.com> wrote: >> Don't do it... >> >> Gino A. Villarini >> g...@aeronetpr.com >> Aeronet Wireless Broadband Corp. >> 787.273.4143 >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of daniel.mul...@metrocom.ca >> Sent: Wednesday, July 31, 2013 11:01 AM >> To: wireless@wispa.org >> Subject: [WISPA] Recommendations for Ubiquiti 3.65 site >> >> We are putting up a 3.65 GHz system next week to take existing customers off of an existing Canopy 2.4GHz system. >> >> Is there anyone who has deployed the 3 Ghz gear from Ubnt and could recommend which model of CPE and if there anything to know to avoid a steep 'learning curve' since we have never deployed anything from Ubiquiti until now. >> >> Suggestions as to the best prices are most welcome too! >> >> Thanks, >> >> Daniel >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
