Set your device for 220-240VAC Many devices have a switch on the power
supply for this. Some devices simply have an input range of 100-250VAC.
Tie your device hot to leg 1
Tie your device neutral to leg 2
Tie your device ground to the neutral/ground of the power outlet.
Can you post a picture of the outlet and of the power cord recptical on
your device?
--
On 11/6/2014 2:40 PM, Scott Carullo wrote:
Ok... sorry to beat this horse but I'm apparently not following you.
There are three lugs my shiny new male plug has.
1-120v leg1 from single phase source
2-120v leg2 from single phase source
3- Neutral wire which bonds to ground at building main panel from
power company.
Cloud Core has three wires feeding the power supply.
1-120v leg (1 or 2) from single phase source
2-Neutral
3-Ground
A) I completely understand how I can take a single 120v wire from leg1
or leg2 of the power source and then take the neutral to both neutral
and ground of the router power supply and make this work - thats easy
- but not code.
B) I also understand how I could take a neutral, a ground and one hot
wire with voltage anywhere from 110-250v and it will work with cloud
core power supply. (but not I do not have this configuration at source)
C) I do not understand how you can take two hots and a neutral and
turn that into anything (just by using a cable) that the router can
use unless that cable is doing nothing more than what I described
above in "A"
Thanks
Scott Carullo
Technical Operations
855-FLSPEED x102
------------------------------------------------------------------------
*From*: "Faisal Imtiaz" <[email protected]>
*Sent*: Thursday, November 06, 2014 8:53 AM
*To*: [email protected], "WISPA General List" <[email protected]>
*Subject*: Re: [WISPA] Off topic sorta power question....
Here is the info on AC power arrangement
http://www.oempanels.com/what-does-single-and-three-phase-power-mean
The CCR specs show it having :
Dualpowersuppliesforredundancy,110-250Vinput,IECconnectors
which means that, you can use either 110 or 220 or 240 on the same
power supply.
All you would have to do is match the power cables...
Regards.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
------------------------------------------------------------------------
*From: *"Scott Carullo" <[email protected]>
*To: *"WISPA General List" <[email protected]>
*Sent: *Wednesday, November 5, 2014 11:55:36 PM
*Subject: *Re: [WISPA] Off topic sorta power question....
Cloud core. There is a difference between having a hot (80-250v),
a neutral and a ground, vs. a neutral and two 120v hots. I
believe the router can handle more than 120v but not in the sense
that its being delivered on two 120v legs with a neutral and no
ground. Its a 3 prong twist lock type receptacle. If there is a
way I'd like to be educated (aside from pulling one of the hots
and hooking the neutral to ground as well on my new non-code
engineered power cable. Educate me.....
I think I'm just going to plug it into the normal 120v 20amp plug
on the wall behind the rack though, seems like the best way
forward considering the options I was just trying to accommodate
the customers request prior to plan B.
Thanks
Scott Carullo
Technical Operations
855-FLSPEED x102
------------------------------------------------------------------------
*From*: "TJ Trout" <[email protected]>
*Sent*: Wednesday, November 05, 2014 3:21 PM
*To*: "WISPA General List" <[email protected]>
*Subject*: Re: [WISPA] Off topic sorta power question....
Everything can use 240 now days probably just need a new power cord
On Nov 5, 2014 12:10 PM, "Bob M" <[email protected]
<mailto:[email protected]>> wrote:
Keep in mind that it is breakered for 240. Splitting the legs
after a 240 vac circuit breaker is not code.
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original message --------
From: Brett Woollum <[email protected] <mailto:[email protected]>>
Date:11/05/2014 12:00 PM (GMT-05:00)
To: WISPA General List <[email protected]
<mailto:[email protected]>>
Subject: Re: [WISPA] Off topic sorta power question....
Tim,
In most cases you can split the hot leads on the 240v outlet
into two 120v circuits. There are adapter pigtails for this if
you don't want to hardware it.
>From memory, our local hardware store sells these (in the US).
A quick Google search revealed this:
http://www.wayfair.com/Champion-Power-Equipment-Generator-Y-Adapter-for-Champion-Power-Equipment-48035-L771-K~CXP1067.html?refid=GX50899353420-CXP1067&device=c&ptid=75696510540&gclid=CJ_Fktv348ECFUdffgod3z4ANw
<http://www.wayfair.com/Champion-Power-Equipment-Generator-Y-Adapter-for-Champion-Power-Equipment-48035-L771-K%7ECXP1067.html?refid=GX50899353420-CXP1067&device=c&ptid=75696510540&gclid=CJ_Fktv348ECFUdffgod3z4ANw>
Brett Woollum
Senior Sales Engineer
[email protected] <mailto:[email protected]>
*Tekify Broadband Internet Services*
Web: http://www.tekify.com
Phone: 510-266-5800 <tel:510-266-5800>, ext 6200
------------------------------------------------------------------------
*From: *"Tim Way" <[email protected] <mailto:[email protected]>>
*To: *[email protected]
<mailto:[email protected]>, "WISPA General List"
<[email protected] <mailto:[email protected]>>
*Sent: *Wednesday, November 5, 2014 7:50:52 AM
*Subject: *Re: [WISPA] Off topic sorta power question....
I would think something like this might be the safer option:
http://www.certifiedmtp.com/step-up-step-down-transformer-500w/?gclid=CNWj1Kro48ECFQipaQodB74ADQ
That said I'm not an electrician and I think that question
might be best answered by one.
Tim Way
On Wed, Nov 5, 2014 at 9:38 AM, Scott Carullo
<[email protected]
<mailto:[email protected]>>wrote:
I need to place a 120v normal 1U router in a rack that
only has 240v twist lock receptacles available for power.
I need to put a UPS there so I just looked for a 240v UPS
with the right plugs but because they are made for a lot
larger load they were way bigger (and more expensive) than
what I was looking for. SO... anyone have a better way to
do this? I have considered taking one leg and bonding the
neutral and ground, but.....
Thanks
Scott Carullo
Technical Operations
855-FLSPEED x102
_______________________________________________
Wireless mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
--
West Michigan Wireless ISP
Allegan, Michigan 49010
269-686-8648
A Division of:
Camp Communication Services, INC
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
