Hi Bill No problem I thought I was doing something wrong. Just tested and the program puts the radio into data mode as well which is pretty neat not seen other programs that do that, normally I have to do it by hand.
Thanks again Bill 73 Richard m0clz. -----Original Message----- From: Bill Somerville Sent: Tuesday, October 21, 2014 1:57 AM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Cat control and the ic-7410 On 21/10/2014 01:50, richard stanley wrote: > Hi Bill Hi Richard, > > I don't know why my compiles are not working but that works great with or > without the dtr so I have left it off. > I don't know why dtr was ticked, I think it didn't work without dtr in > mixw > which used to be my main data program. > Will have to see what i'm doing wrong with the compiling, should read more > before I play. > Will see if I can do 1.4 instead of 1.5 as it works. > Just had a few test contacts one with split and 1 without and it works > great. The 1.5 development branch has all the 1.4 branch changes in it. The problem is almost certainly that I have not pushed all my recent Hamlib changes to my public Hamlib fork repository yet. Sorry about that, there are a lot of changes and I want to ensure that they are all well tested and accepted by the Hamlib team before I make them public. > > Thanks Bill > > 73 Richard m0clz 73 Bill G4WJS. > > > -----Original Message----- > From: Bill Somerville > Sent: Tuesday, October 21, 2014 1:11 AM > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] Cat control and the ic-7410 > > On 21/10/2014 01:05, richard stanley wrote: >> Hi Bill > Hi Richard, >> Thanks for the reply >> >> Still no Joy I have >> ci-v transceive off >> ci-v address 80h >> ci-v baud rate 19200 >> data mode usb >> on the radio and >> >> com3, baud rate 19200, db 1, sb 1, handshake none, force control lines >> dtr >> I have tried combinations of mode and split but they all give the same >> error. > I assume "db 1" means 8 dta-bits. Why have you got force DTR high ticked? >> This works fine in r3673 and the only difference is I can't set the poll >> to >> 0 >> >> I also tried with a cable from a com port and removed the usb but no joy. >> >> It's no biggy as I can use 3673 but would like to be able to play with >> the >> newer versions if possible. > Here is a link to an installer for a test version that has tracing built > in: > > https://dl.dropboxusercontent.com/u/4192709/wsjtx-1.4.0-rc3-win32-r4543-CAT-trace.exe > > install it over the official WSJT-X v1.4.0-rc2 Beta release (no need to > un-install) and run it until the error then quit the application. > > It will create a file "%TEMP%\WSJT-X_trace.log", send that to me for > analysis so I can see what is happening. >> 73 Richard m0clz > 73 > Bill > G4WJS. >> -----Original Message----- >> From: Bill Somerville >> Sent: Tuesday, October 21, 2014 12:31 AM >> To: wsjt-devel@lists.sourceforge.net >> Subject: Re: [wsjt-devel] Cat control and the ic-7410 >> >> On 21/10/2014 00:25, richard stanley wrote: >>> Hi >> Hi Richard, >>> Has anybody got the new wsjt-x to talk to an ic-7410 ?. >>> Mine keeps refusing the connection, I have tried with the built in usb >>> and >>> a >>> separate cat lead and keep getting >>> >>> Hamlib error: Command rejected by the rig while setting current VFO >> You need to make sure "CI-V Transceive Mode" is turned off on your rig. >> Hamlib (and many other rig control programs) cannot cope with the >> unsolicited CAT traffic that "CI-V Transceive Mode" generates. >>> Just tried it with r4549 still no joy. >>> I have tried with different combinations of mode and split with no joy. >>> Also my compilations come out as wsjtx-1.5.0-devel r4549 but posts are >>> talking about wsjtx-1.4.0-rc1 to wsjtx-1.4.0-rc3 >>> so i'm not to sure how mine is saying 1.5.0 . >> We have branched the WSJT-X repository. The main line (v1.5 development) >> is, rather confusingly, in ^/branches/wsjtx and the v1.4 release branch >> is in ^/branches/wsjtx-1.4 . You can stick with the v1.5 development >> line which has any bugfixes for v1.4 merged in as well as any new >> features destined for v1.5. >>> I'm not good with code more a poke and hope but I can learn. >> That's fine, poke away! >>> Richard m0clz >> 73 >> Bill >> G4WJS. >> >> ------------------------------------------------------------------------------ >> Comprehensive Server Monitoring with Site24x7. >> Monitor 10 servers for $9/Month. >> Get alerted through email, SMS, voice calls or mobile push notifications. >> Take corrective actions from your mobile device. >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> --- >> This email is free from viruses and malware because avast! Antivirus >> protection is active. >> http://www.avast.com >> >> >> ------------------------------------------------------------------------------ >> Comprehensive Server Monitoring with Site24x7. >> Monitor 10 servers for $9/Month. >> Get alerted through email, SMS, voice calls or mobile push notifications. >> Take corrective actions from your mobile device. >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel