Here is an installer for the latest v1.4.0-rc3: https://dl.dropboxusercontent.com/u/4192709/wsjtx-1.4.0-rc3-win32-r4547.exe
this is a normal release version without the tracing. It should keep you going until I can get the Hamlib changes published. 73 Bill G4WJS. On 21/10/2014 01:57, Bill Somerville wrote: > On 21/10/2014 01:50, richard stanley wrote: >> Hi Bill > Hi Richard, >> I don't know why my compiles are not working but that works great with or >> without the dtr so I have left it off. >> I don't know why dtr was ticked, I think it didn't work without dtr in mixw >> which used to be my main data program. >> Will have to see what i'm doing wrong with the compiling, should read more >> before I play. >> Will see if I can do 1.4 instead of 1.5 as it works. >> Just had a few test contacts one with split and 1 without and it works >> great. > The 1.5 development branch has all the 1.4 branch changes in it. > > The problem is almost certainly that I have not pushed all my recent > Hamlib changes to my public Hamlib fork repository yet. Sorry about > that, there are a lot of changes and I want to ensure that they are all > well tested and accepted by the Hamlib team before I make them public. >> Thanks Bill >> >> 73 Richard m0clz > 73 > Bill > G4WJS. >> >> -----Original Message----- >> From: Bill Somerville >> Sent: Tuesday, October 21, 2014 1:11 AM >> To: wsjt-devel@lists.sourceforge.net >> Subject: Re: [wsjt-devel] Cat control and the ic-7410 >> >> On 21/10/2014 01:05, richard stanley wrote: >>> Hi Bill >> Hi Richard, >>> Thanks for the reply >>> >>> Still no Joy I have >>> ci-v transceive off >>> ci-v address 80h >>> ci-v baud rate 19200 >>> data mode usb >>> on the radio and >>> >>> com3, baud rate 19200, db 1, sb 1, handshake none, force control lines dtr >>> I have tried combinations of mode and split but they all give the same >>> error. >> I assume "db 1" means 8 dta-bits. Why have you got force DTR high ticked? >>> This works fine in r3673 and the only difference is I can't set the poll >>> to >>> 0 >>> >>> I also tried with a cable from a com port and removed the usb but no joy. >>> >>> It's no biggy as I can use 3673 but would like to be able to play with the >>> newer versions if possible. >> Here is a link to an installer for a test version that has tracing built in: >> >> https://dl.dropboxusercontent.com/u/4192709/wsjtx-1.4.0-rc3-win32-r4543-CAT-trace.exe >> >> install it over the official WSJT-X v1.4.0-rc2 Beta release (no need to >> un-install) and run it until the error then quit the application. >> >> It will create a file "%TEMP%\WSJT-X_trace.log", send that to me for >> analysis so I can see what is happening. >>> 73 Richard m0clz >> 73 >> Bill >> G4WJS. >>> -----Original Message----- >>> From: Bill Somerville >>> Sent: Tuesday, October 21, 2014 12:31 AM >>> To: wsjt-devel@lists.sourceforge.net >>> Subject: Re: [wsjt-devel] Cat control and the ic-7410 >>> >>> On 21/10/2014 00:25, richard stanley wrote: >>>> Hi >>> Hi Richard, >>>> Has anybody got the new wsjt-x to talk to an ic-7410 ?. >>>> Mine keeps refusing the connection, I have tried with the built in usb >>>> and >>>> a >>>> separate cat lead and keep getting >>>> >>>> Hamlib error: Command rejected by the rig while setting current VFO >>> You need to make sure "CI-V Transceive Mode" is turned off on your rig. >>> Hamlib (and many other rig control programs) cannot cope with the >>> unsolicited CAT traffic that "CI-V Transceive Mode" generates. >>>> Just tried it with r4549 still no joy. >>>> I have tried with different combinations of mode and split with no joy. >>>> Also my compilations come out as wsjtx-1.5.0-devel r4549 but posts are >>>> talking about wsjtx-1.4.0-rc1 to wsjtx-1.4.0-rc3 >>>> so i'm not to sure how mine is saying 1.5.0 . >>> We have branched the WSJT-X repository. The main line (v1.5 development) >>> is, rather confusingly, in ^/branches/wsjtx and the v1.4 release branch >>> is in ^/branches/wsjtx-1.4 . You can stick with the v1.5 development >>> line which has any bugfixes for v1.4 merged in as well as any new >>> features destined for v1.5. >>>> I'm not good with code more a poke and hope but I can learn. >>> That's fine, poke away! >>>> Richard m0clz >>> 73 >>> Bill >>> G4WJS. >>> >>> ------------------------------------------------------------------------------ >>> Comprehensive Server Monitoring with Site24x7. >>> Monitor 10 servers for $9/Month. >>> Get alerted through email, SMS, voice calls or mobile push notifications. >>> Take corrective actions from your mobile device. >>> http://p.sf.net/sfu/Zoho >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >>> >>> --- >>> This email is free from viruses and malware because avast! Antivirus >>> protection is active. >>> http://www.avast.com >>> >>> >>> ------------------------------------------------------------------------------ >>> Comprehensive Server Monitoring with Site24x7. >>> Monitor 10 servers for $9/Month. >>> Get alerted through email, SMS, voice calls or mobile push notifications. >>> Take corrective actions from your mobile device. >>> http://p.sf.net/sfu/Zoho >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> ------------------------------------------------------------------------------ >> Comprehensive Server Monitoring with Site24x7. >> Monitor 10 servers for $9/Month. >> Get alerted through email, SMS, voice calls or mobile push notifications. >> Take corrective actions from your mobile device. >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> --- >> This email is free from viruses and malware because avast! Antivirus >> protection is active. >> http://www.avast.com >> >> >> ------------------------------------------------------------------------------ >> Comprehensive Server Monitoring with Site24x7. >> Monitor 10 servers for $9/Month. >> Get alerted through email, SMS, voice calls or mobile push notifications. >> Take corrective actions from your mobile device. >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel