Hi Jay,
I checked operation of the "CQ nnn ..." transmission on the FT-2000 at
W2PU this morning, and it seems to be OK. I was using "Rig" split mode,
and no Commander in the loop.
I see that you have now got this same result.
-- Joe, K1JT
On 9/14/2015 9:07 AM, Jay Hainline wrote:
> I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu
> FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working
> Frequencies list for JTMSK mode. When I put a checkmark in the box to
> activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I
> Enable Tx to CQ, the radio stays on 50.285 instead of switching back to
> 50.280 on transmit. It makes no difference if I have split operation set to
> none or Rig in the settings and the Rx frequency offset with "CQ nnn..." is
> check marked.
>
> 73 Jay
>
> Jay Hainline KA9CFD
> Colchester, IL EN40om
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
