Yes Joe. It appears to be a problem between Dxlabs Commander and WSJT-X. I sent a debugging file created by Commander to Bill. Hope that helps in tracking down the issue. I know a few people on Ping Jockey this morning were having a similar problem. But I don’t know if they also use Commander or not.
73 Jay Jay Hainline KA9CFD Colchester, IL EN40om -----Original Message----- From: Joe Taylor Sent: Monday, September 14, 2015 15:26 To: WSJT software development Subject: Re: [wsjt-devel] CQ Rx bug Hi Jay, I checked operation of the "CQ nnn ..." transmission on the FT-2000 at W2PU this morning, and it seems to be OK. I was using "Rig" split mode, and no Commander in the loop. I see that you have now got this same result. -- Joe, K1JT On 9/14/2015 9:07 AM, Jay Hainline wrote: > I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu > FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working > Frequencies list for JTMSK mode. When I put a checkmark in the box to > activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I > Enable Tx to CQ, the radio stays on 50.285 instead of switching back to > 50.280 on transmit. It makes no difference if I have split operation set > to > none or Rig in the settings and the Rx frequency offset with "CQ nnn..." > is > check marked. > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om > > > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
