On 19/01/2016 21:45, Michael Black wrote: > I checked a bit and found my Xonar U7 mic level was at 0. Never had > checked it before since WSJT-X seemed happy-as-a-clam decoding stuff > with the level at 30. Bumped it up and Audacity now shows -.2 to .2 > and can hear it without cranking up the speakers. I've got the level > at 70 on the Xonar now and of course had to crank down the digital > gain a fair bit. Hi Mike,
those Xonar numbers don't sound like dB figures, at least that's what I assume since 70dB would be unrealistically high. If you can persuade it to show dB then you should be able to set it to 0dB which should mean pass the raw ADC levels. That is good because no digital manipulation will be being done by the sound card driver. Then you can use the WSJT-X Rx gain slider as the only digital manipulation. Having the WSJT-X slider as near to the middle as possible is also good which can be achieved by adjusting the analog gain at the source if your rig allows it. The Windows sound level sliders can be changed to dB indication by right clicking them and selecting dB. 73 Bill G4WJS. ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
