Hi all,
No need to send any more .wav files that produce false decodes.
In future:
- If you don't like false decodes set your Decode option to Fast or
Normal.
- If you want the very best decoding performance and are happy
rejecting the small number of easily recognizable false decodes that
you may see, set Decode to Deep and use AP.
Some Guiding Principles for our decoding algorithms:
- Decodable messages should always look the same to all users,
regardless of any settings of "Special operating activities."
- If you aren’t seeing occasional false decodes, you aren’t trying hard
enough.
-- 73, Joe, K1JT
On 5/26/2020 4:53 PM, Stephen VK3SIR wrote:
HiFolks,
There seems to be some strong evidence mounting regarding non-standard
suffix usage – in particular /R …
Remember that we should be using Save/Save Decoded so that these can be
emailed on request to The Core Development Team when discovered !
73
Steve I
VK3VM/VK3SIR
*From:*Allan VK4QG <[email protected]>
*Sent:* Tuesday, 26 May 2020 4:05 PM
*To:* [email protected]
*Subject:* [wsjt-devel] WSJT-X 2.2.0 rc2
Gentlemen,
To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM, W10 pro
64bit. I do not use CAT but instead use RTS on COM1 for opto-isolated
PTT and XFR isolation for audio in and out of the sound-card, and have
done so without issue since 2006.
Two problems : -
1. I have found with rc2 that occasionally PTT is not working at all
and when it does there is often no TX audio present either. While
monitoring 'Radio' under 'Settings' I have noticed when this occurs,
after a successful transmission about two seconds into the _RX_ period
the 'Test PTT' button turns red and from that point there is no PTT in
the following TX period. After a time it appears to clear itself and PTT
in the following period with or without TX audio.
2. I am still getting numerous false decodes. Most of these contain
'/R' and '<.....>'. I am not using AP.
Many thanks,
Allan - VK4QG
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
