Good morning everyone
OS 10.14.6 here (Intel ).. I saw in 2.4.0rc2 installation instructions we must
uninstall then reinstall the drivers to the radio.
For my application, this is the USB-CODEC inside the K3S radio.. I am currently
trying to figure out how to uninstall then reinstall this driver Hoping it
fixes the (hang-on PTT) issue I also have
73,
Dave
From: John Stengrevics <jstengrev...@comcast.net>
Reply-To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Date: Saturday, March 6, 2021 at 8:15 AM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
Bill,
I have CAT selected and it does connect when I click on Test.
John (G4KLA) had asked what driver I was using. I replied that the driver had
not changed. It has always been /dev/cu.usbserial-A503XYAO.
John
WA1EAZ
On Mar 6, 2021, at 9:07 AM, Bill Somerville <g4...@classdesign.com> wrote:
Hi John,
which option do you have checked for "Preferences->Radio->PTT Method"?
73
Bill
G4WJS.
On 06/03/2021 14:03, John Stengrevics wrote:
Hi Bill,
I just tried to use Q65 with “Cumulative" selected as you suggested. However,
the problem is still there as described below. I have to shut down my
transceiver (Elecraft K3S) to get it to stop transmitting.
Thanks,
John
WA1EAZ
On Mar 6, 2021, at 8:44 AM, Bill Somerville <g4...@classdesign.com> wrote:
Hi John,
I am not sure as I have not investigated this issue yet. It is easy enough to
check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, and see
if the iusse goes away.
73
Bill
G4WJS.
On 06/03/2021 13:25, John Stengrevics wrote:
Hi Bill,
Will this fix solve the problem I reported yesterday with OS Big Sur? I’ll
repost below in case you didn’t see it.
Thanks,
John
WA1EAZ
Repost - some additions in red:
John & Joe,
I had been using the previous version successfully on a MacBook Pro (Intel not
M1) OS Big Sur 11.2.2.
Today, I downloaded Mac version 2.4.0-rc2.
When running Q65, T/R = 30 seconds, Submode A, the program continues to
transmit after the 30 second period is complete for 60 seconds total. However,
it does not seem to drive my amplifier after 30 seconds. [PTT is activated for
the second 30 seconds, but no audio to drive the amp.] I have since tried FT8
on WSJT-X and can confirm that it works as usual. Thus, the problem seems to
be isolated to Q65.
I did follow the instructions in the Readme file.
If there is a file I can send you, please let me know.
I would appreciate any suggestions you can provide.
Best 73,
John
WA1EAZ
On Mar 6, 2021, at 5:55 AM, Bill Somerville <g4...@classdesign.com> wrote:
Hi Dave and Kevin,
we have finally tracked down the cause of this crash, thanks for your patience
it was not so easy to track down. It is repaired for the next release, for now
if you do not use of the Q65_Sync Wide Graph synchronization plot the crash
will be avoided. Note this is not a Mac specific issue although it does seem to
have the most severe effects on that platform.
73
Bill
G4WJS.
On 06/03/2021 03:59, David Schmocker wrote:
Hello all,
A second report that mirrors this one: WSJT-X 2.4.0rc2
OS 10.14.6, Mac Mini
Mode Q65, Waterfall Q65_ Sync selected and slow to let go of PTT line to K3S
radio (even after Tx period). (when I go into Radio Panel, the Test PTT Red
bar stays on, won't easily release).
Then when a decode should take place, I get a crash exactly as Kevin reported
with the same exact message as reported below.
Thank you, 73,
Dave KJ9I
On 3/5/21, 8:47 PM, "Kevin McQuiggin"<mcqui...@sfu.ca> wrote:
Hi All:
I tried submitting this earlier today, but it didn’t seem to make to the
list. Hence, a re-submission:
Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
Selection of “Q65_Sync” from dropdown box on the wide graph causes a crash
as soon as the application starts to TX. Selection of “Cumulative” (the
default) and TX/RX are normal.
Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.
I have saved the crash dump and can provide as necessary.
73,
Kevin VE7ZD
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
