John, ~/Library is usually a hidden directory in the finder. I made a symlink to it called 'libr' that I use to get to it via the finder. You can see the Library directory in terminal, so if you want to cp the file from a terminal session, you can.
To create a symbolic link, in terminal type: ln -s Library libr Once created, you can see libr in finder and click into it. 73 de K4DET > On Mar 6, 2021, at 9:36 AM, John Stengrevics <jstengrev...@comcast.net> wrote: > > Hi Bill, > > I can’t find the ~/Library/Preferences/ directory in which to put the file. > Can you provide a bit more detail on how I can locate it? Sorry. > > John > WA1EAZ > >> On Mar 6, 2021, at 9:20 AM, Bill Somerville <g4...@classdesign.com >> <mailto:g4...@classdesign.com>> wrote: >> >> Hi John, >> >> so I can see what is happening put the attached file into the WSJT-X >> configuration files directory (~/Library/Preferences/ on macOS), restart >> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do >> not turn off the rig until WSJT-X has exited). There will be a new file on >> your Desktop called WSJT-X_RigControl.log, send me that file for analysis >> please (g4wjs <at> classdesign <dot> com)? >> >> Once you have sent me the log file delete the wsjtx_log_config.ini and >> WSJT-X_RigControl.log files to resume normal operation. >> >> 73 >> Bill >> G4WJS. >> >> On 06/03/2021 14:13, John Stengrevics wrote: >>> Bill, >>> >>> I have CAT selected and it does connect when I click on Test. >>> >>> John (G4KLA) had asked what driver I was using. I replied that the driver >>> had not changed. It has always been /dev/cu.usbserial-A503XYAO. >>> >>> John >>> WA1EAZ >>> >>>> On Mar 6, 2021, at 9:07 AM, Bill Somerville <g4...@classdesign.com >>>> <mailto:g4...@classdesign.com>> wrote: >>>> >>>> Hi John, >>>> >>>> which option do you have checked for "Preferences->Radio->PTT Method"? >>>> >>>> 73 >>>> Bill >>>> G4WJS. >>>> >>>> On 06/03/2021 14:03, John Stengrevics wrote: >>>>> Hi Bill, >>>>> >>>>> I just tried to use Q65 with “Cumulative" selected as you suggested. >>>>> However, the problem is still there as described below. I have to shut >>>>> down my transceiver (Elecraft K3S) to get it to stop transmitting. >>>>> >>>>> Thanks, >>>>> >>>>> John >>>>> WA1EAZ >>>>> >>>>>> On Mar 6, 2021, at 8:44 AM, Bill Somerville <g4...@classdesign.com >>>>>> <mailto:g4...@classdesign.com>> wrote: >>>>>> >>>>>> Hi John, >>>>>> >>>>>> I am not sure as I have not investigated this issue yet. It is easy >>>>>> enough to check, select "Cumulative" for the 2D spectrum display, >>>>>> restart WSJT-X, and see if the iusse goes away. >>>>>> >>>>>> 73 >>>>>> Bill >>>>>> G4WJS. >>>>>> >>>>>> On 06/03/2021 13:25, John Stengrevics wrote: >>>>>>> Hi Bill, >>>>>>> >>>>>>> Will this fix solve the problem I reported yesterday with OS Big Sur? >>>>>>> I’ll repost below in case you didn’t see it. >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> John >>>>>>> WA1EAZ >>>>>>> >>>>>>> Repost - some additions in red: >>>>>>> >>>>>>> John & Joe, >>>>>>> >>>>>>> I had been using the previous version successfully on a MacBook Pro >>>>>>> (Intel not M1) OS Big Sur 11.2.2. >>>>>>> >>>>>>> Today, I downloaded Mac version 2.4.0-rc2. >>>>>>> >>>>>>> When running Q65, T/R = 30 seconds, Submode A, the program continues to >>>>>>> transmit after the 30 second period is complete for 60 seconds total. >>>>>>> However, it does not seem to drive my amplifier after 30 seconds. [PTT >>>>>>> is activated for the second 30 seconds, but no audio to drive the amp.] >>>>>>> I have since tried FT8 on WSJT-X and can confirm that it works as >>>>>>> usual. Thus, the problem seems to be isolated to Q65. >>>>>>> >>>>>>> I did follow the instructions in the Readme file. >>>>>>> >>>>>>> If there is a file I can send you, please let me know. >>>>>>> >>>>>>> I would appreciate any suggestions you can provide. >>>>>>> >>>>>>> Best 73, >>>>>>> >>>>>>> John >>>>>>> WA1EAZ >>>>>>> >>>>>>>> On Mar 6, 2021, at 5:55 AM, Bill Somerville <g4...@classdesign.com >>>>>>>> <mailto:g4...@classdesign.com>> wrote: >>>>>>>> >>>>>>>> Hi Dave and Kevin, >>>>>>>> >>>>>>>> we have finally tracked down the cause of this crash, thanks for your >>>>>>>> patience it was not so easy to track down. It is repaired for the next >>>>>>>> release, for now if you do not use of the Q65_Sync Wide Graph >>>>>>>> synchronization plot the crash will be avoided. Note this is not a Mac >>>>>>>> specific issue although it does seem to have the most severe effects >>>>>>>> on that platform. >>>>>>>> >>>>>>>> 73 >>>>>>>> Bill >>>>>>>> G4WJS. >>>>>>>> >>>>>>>> On 06/03/2021 03:59, David Schmocker wrote: >>>>>>>>> Hello all, >>>>>>>>> >>>>>>>>> A second report that mirrors this one: WSJT-X 2.4.0rc2 >>>>>>>>> >>>>>>>>> OS 10.14.6, Mac Mini >>>>>>>>> >>>>>>>>> Mode Q65, Waterfall Q65_ Sync selected and slow to let go of PTT >>>>>>>>> line to K3S radio (even after Tx period). (when I go into Radio >>>>>>>>> Panel, the Test PTT Red bar stays on, won't easily release). >>>>>>>>> >>>>>>>>> Then when a decode should take place, I get a crash exactly as Kevin >>>>>>>>> reported with the same exact message as reported below. >>>>>>>>> >>>>>>>>> Thank you, 73, >>>>>>>>> >>>>>>>>> Dave KJ9I >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 3/5/21, 8:47 PM, "Kevin McQuiggin"<mcqui...@sfu.ca >>>>>>>>> <mailto:mcqui...@sfu.ca>> wrote: >>>>>>>>> >>>>>>>>> Hi All: >>>>>>>>> I tried submitting this earlier today, but it didn’t seem to make >>>>>>>>> to the list. Hence, a re-submission: >>>>>>>>> >>>>>>>>> Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave. >>>>>>>>> >>>>>>>>> Selection of “Q65_Sync” from dropdown box on the wide graph >>>>>>>>> causes a crash as soon as the application starts to TX. Selection of >>>>>>>>> “Cumulative” (the default) and TX/RX are normal. >>>>>>>>> >>>>>>>>> Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”. >>>>>>>>> >>>>>>>>> I have saved the crash dump and can provide as necessary. >>>>>>>>> >>>>>>>>> 73, >>>>>>>>> >>>>>>>>> Kevin VE7ZD >> >> <wsjtx_log_config.ini>_______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
