Hi Steve, Thanks for that.
I have followed your suggestions. However, I don’t see ~/Library/Preferences/ under WSJT. (Bill had asked me to move a file that he sent (wsjt_log_config.ini) there for debugging purposes.) Maybe move it to WSJT INI? 73, John WA1EAZ > On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > John, > You can make the ~/Library folder visible in Finder with the following steps: > > 1. Open a Finder window. > 2. Select your home directory in the left panel of the Finder window. > 3. Select Show View Options under the “View” menu. > 4. Check the “Show Library Folder” box. > > Thereafter, your Library folder will always be visible. > > 73 Steve k9an > >> On Mar 6, 2021, at 8:36 AM, John Stengrevics <jstengrev...@comcast.net >> <mailto:jstengrev...@comcast.net>> wrote: >> >> Hi Bill, >> >> I can’t find the ~/Library/Preferences/ directory in which to put the file. >> Can you provide a bit more detail on how I can locate it? Sorry. >> >> John >> WA1EAZ >> >>> On Mar 6, 2021, at 9:20 AM, Bill Somerville <g4...@classdesign.com >>> <mailto:g4...@classdesign.com>> wrote: >>> >>> Hi John, >>> >>> so I can see what is happening put the attached file into the WSJT-X >>> configuration files directory (~/Library/Preferences/ on macOS), restart >>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do >>> not turn off the rig until WSJT-X has exited). There will be a new file on >>> your Desktop called WSJT-X_RigControl.log, send me that file for analysis >>> please (g4wjs <at> classdesign <dot> com)? >>> >>> Once you have sent me the log file delete the wsjtx_log_config.ini and >>> WSJT-X_RigControl.log files to resume normal operation. >>> >>> 73 >>> Bill >>> G4WJS. >>> >>> On 06/03/2021 14:13, John Stengrevics wrote: >>>> Bill, >>>> >>>> I have CAT selected and it does connect when I click on Test. >>>> >>>> John (G4KLA) had asked what driver I was using. I replied that the driver >>>> had not changed. It has always been /dev/cu.usbserial-A503XYAO. >>>> >>>> John >>>> WA1EAZ >>>> >>>>> On Mar 6, 2021, at 9:07 AM, Bill Somerville <g4...@classdesign.com >>>>> <mailto:g4...@classdesign.com>> wrote: >>>>> >>>>> Hi John, >>>>> >>>>> which option do you have checked for "Preferences->Radio->PTT Method"? >>>>> >>>>> 73 >>>>> Bill >>>>> G4WJS. >>>>> >>>>> On 06/03/2021 14:03, John Stengrevics wrote: >>>>>> Hi Bill, >>>>>> >>>>>> I just tried to use Q65 with “Cumulative" selected as you suggested. >>>>>> However, the problem is still there as described below. I have to shut >>>>>> down my transceiver (Elecraft K3S) to get it to stop transmitting. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> John >>>>>> WA1EAZ >>>>>> >>>>>>> On Mar 6, 2021, at 8:44 AM, Bill Somerville <g4...@classdesign.com >>>>>>> <mailto:g4...@classdesign.com>> wrote: >>>>>>> >>>>>>> Hi John, >>>>>>> >>>>>>> I am not sure as I have not investigated this issue yet. It is easy >>>>>>> enough to check, select "Cumulative" for the 2D spectrum display, >>>>>>> restart WSJT-X, and see if the iusse goes away. >>>>>>> >>>>>>> 73 >>>>>>> Bill >>>>>>> G4WJS. >>>>>>> >>>>>>> On 06/03/2021 13:25, John Stengrevics wrote: >>>>>>>> Hi Bill, >>>>>>>> >>>>>>>> Will this fix solve the problem I reported yesterday with OS Big Sur? >>>>>>>> I’ll repost below in case you didn’t see it. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> John >>>>>>>> WA1EAZ >>>>>>>> >>>>>>>> Repost - some additions in red: >>>>>>>> >>>>>>>> John & Joe, >>>>>>>> >>>>>>>> I had been using the previous version successfully on a MacBook Pro >>>>>>>> (Intel not M1) OS Big Sur 11.2.2. >>>>>>>> >>>>>>>> Today, I downloaded Mac version 2.4.0-rc2. >>>>>>>> >>>>>>>> When running Q65, T/R = 30 seconds, Submode A, the program continues >>>>>>>> to transmit after the 30 second period is complete for 60 seconds >>>>>>>> total. However, it does not seem to drive my amplifier after 30 >>>>>>>> seconds. [PTT is activated for the second 30 seconds, but no audio to >>>>>>>> drive the amp.] I have since tried FT8 on WSJT-X and can confirm that >>>>>>>> it works as usual. Thus, the problem seems to be isolated to Q65. >>>>>>>> >>>>>>>> I did follow the instructions in the Readme file. >>>>>>>> >>>>>>>> If there is a file I can send you, please let me know. >>>>>>>> >>>>>>>> I would appreciate any suggestions you can provide. >>>>>>>> >>>>>>>> Best 73, >>>>>>>> >>>>>>>> John >>>>>>>> WA1EAZ >>>>>>>> >>>>>>>>> On Mar 6, 2021, at 5:55 AM, Bill Somerville <g4...@classdesign.com >>>>>>>>> <mailto:g4...@classdesign.com>> wrote: >>>>>>>>> >>>>>>>>> Hi Dave and Kevin, >>>>>>>>> >>>>>>>>> we have finally tracked down the cause of this crash, thanks for your >>>>>>>>> patience it was not so easy to track down. It is repaired for the >>>>>>>>> next release, for now if you do not use of the Q65_Sync Wide Graph >>>>>>>>> synchronization plot the crash will be avoided. Note this is not a >>>>>>>>> Mac specific issue although it does seem to have the most severe >>>>>>>>> effects on that platform. >>>>>>>>> >>>>>>>>> 73 >>>>>>>>> Bill >>>>>>>>> G4WJS. >>>>>>>>> >>>>>>>>> On 06/03/2021 03:59, David Schmocker wrote: >>>>>>>>>> Hello all, >>>>>>>>>> >>>>>>>>>> A second report that mirrors this one: WSJT-X 2.4.0rc2 >>>>>>>>>> >>>>>>>>>> OS 10.14.6, Mac Mini >>>>>>>>>> >>>>>>>>>> Mode Q65, Waterfall Q65_ Sync selected and slow to let go of PTT >>>>>>>>>> line to K3S radio (even after Tx period). (when I go into Radio >>>>>>>>>> Panel, the Test PTT Red bar stays on, won't easily release). >>>>>>>>>> >>>>>>>>>> Then when a decode should take place, I get a crash exactly as Kevin >>>>>>>>>> reported with the same exact message as reported below. >>>>>>>>>> >>>>>>>>>> Thank you, 73, >>>>>>>>>> >>>>>>>>>> Dave KJ9I >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 3/5/21, 8:47 PM, "Kevin McQuiggin"<mcqui...@sfu.ca >>>>>>>>>> <mailto:mcqui...@sfu.ca>> wrote: >>>>>>>>>> >>>>>>>>>> Hi All: >>>>>>>>>> I tried submitting this earlier today, but it didn’t seem to >>>>>>>>>> make to the list. Hence, a re-submission: >>>>>>>>>> >>>>>>>>>> Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave. >>>>>>>>>> >>>>>>>>>> Selection of “Q65_Sync” from dropdown box on the wide graph >>>>>>>>>> causes a crash as soon as the application starts to TX. Selection >>>>>>>>>> of “Cumulative” (the default) and TX/RX are normal. >>>>>>>>>> >>>>>>>>>> Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”. >>>>>>>>>> >>>>>>>>>> I have saved the crash dump and can provide as necessary. >>>>>>>>>> >>>>>>>>>> 73, >>>>>>>>>> >>>>>>>>>> Kevin VE7ZD >>> >>> <wsjtx_log_config.ini>_______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> <https://lists.sourceforge.net/lists/listinfo/wsjt-devel> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
