Hi Mike,
I'm using version 4.5.5 and I don't have any rigctld-wsjtx available.
I configure the rigctld daemon for the TS2000 and it works very well
setting NET rigctl from WSJTX.
The problem I have is when I have to set up the IC7300, I can't
understand how to compose the rigctld configuration string for IC7300.
Have an idea?
Il 2024-07-06 18:26 Black Michael ha scritto:
Are you using rigctld-wsjtx ?
Are you running WSJT-X already? You need to shut down WSJT-X, start
rigctld-wsjtx, then select Hamlib NET rigctl in WSJT-X.
Mike W9MDB
On Saturday, July 6, 2024 at 11:11:39 AM CDT, wsjtx-dev--- via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Hi everyone,
I successfully use an IC7300 with WSJTX.
I would like to connect the radio via rigctld, but I can't connect,
my string is: rigctld -m 3073 -r /dev/ttyUSB0 -s 19200 -vvvv
Where am I wrong?
The IC7300 works perfectly when connected directly via WSJTX, I was
able
to use a TS2000 perfectly via rigctld, so I think I'm doing something
wrong in the 7300's configuration string.
Thank's to all
IZ0KBA
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
