Show me your WSJT-X settings for the IC-7300. Mike W9MDB
On Saturday, July 6, 2024 at 12:54:24 PM CDT, wsjtx-...@iz0kba.it <wsjtx-...@iz0kba.it> wrote: Hi Mike, I'm using version 4.5.5 and I don't have any rigctld-wsjtx available. I configure the rigctld daemon for the TS2000 and it works very well setting NET rigctl from WSJTX. The problem I have is when I have to set up the IC7300, I can't understand how to compose the rigctld configuration string for IC7300. Have an idea? Il 2024-07-06 18:26 Black Michael ha scritto: > Are you using rigctld-wsjtx ? > > Are you running WSJT-X already? You need to shut down WSJT-X, start > rigctld-wsjtx, then select Hamlib NET rigctl in WSJT-X. > > Mike W9MDB > > > > > > > > > On Saturday, July 6, 2024 at 11:11:39 AM CDT, wsjtx-dev--- via > wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > Hi everyone, > I successfully use an IC7300 with WSJTX. > I would like to connect the radio via rigctld, but I can't connect, > my string is: rigctld -m 3073 -r /dev/ttyUSB0 -s 19200 -vvvv > Where am I wrong? > > The IC7300 works perfectly when connected directly via WSJTX, I was > able > to use a TS2000 perfectly via rigctld, so I think I'm doing something > wrong in the 7300's configuration string. > > Thank's to all > > IZ0KBA > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
