SHould we install development and debigging pacakages in the images when we want to build a toolchain.. I mean this
"dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) Greets, Satya On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop < swaroop.dama...@gmail.com> wrote: > Hi Jessica & Philip, > > I have an issue... This is such a long error ... I even did a fresh build > by deleting the "tmp" directory. The image build went very well but the > toolchain is always giving me a error... > > *| Selecting previously unselected package xz-dev.* > *| Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...* > *| The following package disappeared from your system as* > *| all files have been overwritten by other packages:* > *| avahi* > *| log_check: Using > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > as logfile* > *| Logfile is clean* > *| Installing NATIVESDK packages* > *| Ign file: ./ InRelease* > *| Ign file: ./ InRelease* > *| Ign file: ./ Release.gpg* > *| Ign file: ./ Release.gpg* > *| Get:1 file: ./ Release [24 B]* > *| Get:2 file: ./ Release [11 B]* > *| Ign file: ./ Translation-en* > *| Ign file: ./ Translation-en* > *| Reading package lists...* > *| W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__* > *| W: You may want to run apt-get update to correct these problems* > *| Reading package lists...* > *| Building dependency tree...* > *| Reading state information...* > *| Some packages could not be installed. This may mean that you have* > *| requested an impossible situation or if you are using the unstable* > *| distribution that some required packages have not yet been created* > *| or been moved out of Incoming.* > *| The following information may help to resolve the situation:* > *| * > *| The following packages have unmet dependencies:* > *| packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but > it is not installable* > *| Depends: gcc-cross-canadian-arm but > it is not installable* > *| Depends: meta-environment-arm but > it is not installable* > *| Depends: > binutils-cross-canadian-arm but it is not installable* > *| W: Ignoring Provides line with DepCompareOp for package > nativesdk-pkgconfig__pkg-config__* > *| W: You may want to run apt-get update to correct these problems* > *| E: Unable to correct problems, you have held broken packages.* > *| DEBUG: Python function do_populate_sdk finished* > *| ERROR: Function failed: populate_sdk_image (see > /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066 > for further information)* > *ERROR: Task 10 (/home/damarla/yocto/poky/meta/recipes-graphics/images/ > core-image-skidata.bb, do_populate_sdk) failed with exit code '1'* > *NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to > be rerun and 1 failed.* > * > * > *Summary: 1 task failed:* > * /home/damarla/yocto/poky/meta/recipes-graphics/images/ > core-image-skidata.bb, do_populate_sdk* > *Summary: There was 1 ERROR message shown, returning a non-zero exit code. > * > > I am not able to install those packages as they say there are no > installation candidate for them... > > > On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zh...@intel.com>wrote: > >> Hi Satya,**** >> >> ** ** >> >> Use bitbake image-name –c populate_sdk, this allows you to create a >> toolchain with sysroot that match your target image that allows you to >> develop app against…**** >> >> ** ** >> >> Cheers,**** >> >> Jessica**** >> >> ** ** >> >> *From:* yocto-boun...@yoctoproject.org [mailto: >> yocto-boun...@yoctoproject.org] *On Behalf Of *Satya Swaroop Damarla >> *Sent:* Wednesday, June 05, 2013 6:05 AM >> *To:* yocto@yoctoproject.org >> *Subject:* [yocto] Application Development**** >> >> ** ** >> >> Hi Guys,**** >> >> ** ** >> >> I have an issue... I created a custom image based on NVIDIA Tegra2 with a >> custom kernel. I installed packages specific Tegra board and application >> specific. Now we want to send the baord and the new linux image for >> application development... **** >> >> ** ** >> >> As I went through ADT manual, I only found qemu based toolchains but I >> want to create toolchain based on my rootfs and kernel... so that the >> development team can develop a voip application for the board... I am kind >> of stuck how to proceed in this issue...**** >> >> ** ** >> >> I really need a small way out and hopefully I will catch things >> automatically..**** >> >> ** ** >> >> Cheers,**** >> >> Satya**** >> > >
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto