Hi Maciek, In "final_build/conf/local.conf" , EXTRA_IMAGE_FEATURES = "debug-tweaks".
So, yes "debug-tweaks" is present. Thanks, Shubham_K ________________________________________ From: Maciek Borzecki <maciej.borze...@open-rnd.pl> Sent: Wednesday, February 3, 2016 8:19 PM To: Shubham Kumar (Product Engineering Service); yocto@yoctoproject.org Subject: Re: [yocto] [meta-intel]:Quark not accepting "root" username at login prompt On śro, 2016-02-03 at 14:00 +0000, shubham.kum...@wipro.com wrote: > > Hi all, > > I would additionally like to mention that the same problem persists when > trying to boot > the Galileo with core-image-sato. > The steps which I followed are as follows:- > Inside the poky directory, > > 1. source oe-init-build-env final_build/ > Now ,Inside the final_build/ directory > > 2. bitbake core-image-sato > > 3. wic create mkgalileodisk -e core-image-sato -o /<directory_path>/ > > Now, in <directory_path>/build , > > 4. sudo dd if=mkgalileodisk-201602031847-mmcblk0.direct of=/dev/sdb > > Now when I tried to boot the Galileo with this SD card , it booted but at the > login > prompt doesn't accept the "root". It says "Login incorrect ". > > The observation is similar wit core-image-minimal as well. > > I'm definitely missing something. I would appreciate any help in this > direction. > > > Thanks, > Shubham_K > > From: Shubham Kumar (Product Engineering Service) > Sent: Wednesday, February 3, 2016 5:11 PM > To: yocto@yoctoproject.org > Subject: [meta-intel]:Quark not accepting "root" username at login prompt > > Hi all, > > I built a core-image-minimal with additions of a few packages like tools-sdk > and tools- > debug. With WIK tool and the kickstart file "mkgalileodisk", I created the > image. Then I > dd'd the image to the SD card. The Galileo booted with the image, but it's > not accepting > "root" as the username at the login terminal. It shows the message "Invalid > username". I > don't have any idea of why this happened. I even looked at the etc/passwd > file, but > didn't get any idea. > Please note that I have cloned the latest jethro meta-intel layer from the > Yocto git > repository. > > Did I miss anything in the build process? Any help in this direction will be > appreciated. Can you verify if debug-tweaks is present in IMAGE_FEATURES? -- Maciej Borzęcki Senior Software Developer at Open-RnD Sp. z o.o., Poland www.open-rnd.pl mobile: +48 889 117 365, fax: +48 42 657 9079 Niniejsza wiadomość wraz z załącznikami może zawierać chronione prawem lub poufne informacje i została wysłana wyłącznie do wiadomości i użytku osób, do których została zaadresowana. Jeśli wiadomość została otrzymana przypadkowo zabrania się jej kopiowania lub rozsyłania do osób trzecich. W takim przypadku uprasza się o natychmiastowe zniszczenie wiadomości oraz poinformowanie nadawcy o zaistniałej sytuacji za pomocą wiadomości zwrotnej. Dziękujemy. This message, including any attachments hereto, may contain privileged or confidential information and is sent solely for the attention and use of the intended addressee(s). If you are not an intended addressee, you may neither use this message nor copy or deliver it to anyone. In such case, you should immediately destroy this message and kindly notify the sender by reply email. Thank you. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto