> Dnia 3 luty 2016 o 15:55 shubham.kum...@wipro.com napisał(a): > > > In "final_build/conf/local.conf" , EXTRA_IMAGE_FEATURES = "debug-tweaks". > > So, yes "debug-tweaks" is present. >
Try running bitbake -e <yourimagename> and check the value of IMAGE_FEATURES (and where it gets assigned). You may also want to check if /etc/shadow in the rootfs contains proper entry. It should look like this: root:*:16834:0:99999:7::: When inspecting the output of bitbake -e, look for IMAGE_ROOTFS, this will point to the location of the rootfs for your image. -- Maciej Borzęcki Senior Software Engineer at Open-RnD Sp. z o.o. www.open-rnd.pl, Facebook, Twitter Niniejsza wiadomość wraz z załącznikami może zawierać chronione prawem lub poufne informacje i została wysłana wyłącznie do wiadomości i użytku osób, do których została zaadresowana. Jeśli wiadomość została otrzymana przypadkowo zabrania się jej kopiowania lub rozsyłania do osób trzecich. W takim przypadku uprasza się o natychmiastowe zniszczenie wiadomości oraz poinformowanie nadawcy o zaistniałej sytuacji za pomocą wiadomości zwrotnej. Dziękujemy. This message, including any attachments hereto, may contain privileged or confidential information and is sent solely for the attention and use of the intended addressee(s). If you are not an intended addressee, you may neither use this message nor copy or deliver it to anyone. In such case, you should immediately destroy this message and kindly notify the sender by reply email. Thank you. -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto