Hi Khem,

Thanks for your quick response.

That entry is already there in "<build>/conf/local.conf " file as follows:-

# We default to enabling the debugging tweaks.
EXTRA_IMAGE_FEATURES = "debug-tweaks"

In addition to the above, I have also added "tools-sdk" and "tools-debug" as 
follows in the same file :-

#Other packages
EXTRA_IMAGE_FEATURES = "tools-sdk"
EXTRA_IMAGE_FEATURES = "tools-debug"

Is there anything else I'm missing?


Thanks,
Shubham_K


________________________________________
From: Khem Raj <raj.k...@gmail.com>
Sent: Thursday, February 4, 2016 12:48 PM
To: Shubham Kumar (Product Engineering Service)
Cc: yocto@yoctoproject.org; maciej.borze...@open-rnd.pl
Subject: Re: [yocto] [meta-intel]:Quark not accepting "root" username at login 
prompt

On Wed, Feb 3, 2016 at 10:43 PM,  <shubham.kum...@wipro.com> wrote:
> Hi Maciej,
>
>
> I did "bitbake -r core-image-sato" and redirected the output to a file. From 
> that I found that IMAGE_FEATURES is assigned in image.bblass. A few of the 
> contents in the file were as follows:-
>
> # IMAGE_FEATURES may contain any available package group
> IMAGE_FEATURES ?= ""
> IMAGE_FEATURES[type] = "list"
> IMAGE_FEATURES[validitems] += "debug-tweaks read-only-rootfs 
> empty-root-password allow-empty-password post-install-logging"
>
> I thought of modifying the last entry and made it as follows:-
>
> IMAGE_FEATURES[validitems] += "debug-tweaks read-only-rootfs"

thats not how you do it. you add it to local configuration metadata
e.g. in your conf/local.conf

you define it e.g.

EXTRA_IMAGE_FEATURES = "debug-tweaks"

>
> Then I rebuilt the images using "bitbake core-image-sato" and then wic 
> tool.But still same issue persists.The Galileo is booting , but not accepting 
> "root"  as username and again asking for password.
>
>
> .
> .
> .
> I also checked for IMAGE_ROOTFS in "image.bbclass" file and got the path to 
> the rootfs as follows:-
> IMAGE_ROOTFS="/home/yogesh/myYocto/poky/final_build/tmp/work/intel_quark-poky-linux/core-image-sato/1.0-r0/rootfs"
>
> In etc/shadow, proper entry is present with ----  root:*:16834:0:99999:7:::
>
> Thanks for your co-operation, Maciej. Looking forward to reaolving this issue 
> asap.
>
>
> Thanks,
> Shubham_K
>
>
>
> ________________________________________
> From: Maciej Borzecki <maciej.borze...@open-rnd.pl>
> Sent: Wednesday, February 3, 2016 10:59 PM
> To: Shubham Kumar (Product Engineering Service); yocto@yoctoproject.org
> Subject: Re: [yocto] [meta-intel]:Quark not accepting "root" username at 
> login prompt
>
>> Dnia 3 luty 2016 o 15:55 shubham.kum...@wipro.com napisał(a):
>>
>>
>> In "final_build/conf/local.conf" , EXTRA_IMAGE_FEATURES = "debug-tweaks".
>>
>> So, yes "debug-tweaks" is present.
>>
>
> Try running bitbake -e <yourimagename> and check the value of
> IMAGE_FEATURES (and where it gets assigned).
>
> You may also want to check if /etc/shadow in the rootfs contains proper
> entry. It should look like this:
>
>        root:*:16834:0:99999:7:::
>
> When inspecting the output of bitbake -e, look for IMAGE_ROOTFS, this
> will point to the location of the rootfs for your image.
>
> --
> Maciej Borzęcki
> Senior Software Engineer at Open-RnD Sp. z o.o.
> www.open-rnd.pl, Facebook, Twitter
>
> Niniejsza wiadomość wraz z załącznikami może zawierać chronione prawem
> lub poufne informacje i została wysłana wyłącznie do wiadomości i
> użytku osób, do których została zaadresowana. Jeśli wiadomość została
> otrzymana przypadkowo zabrania się jej kopiowania lub rozsyłania do
> osób trzecich. W takim przypadku uprasza się o natychmiastowe
> zniszczenie wiadomości oraz poinformowanie nadawcy o zaistniałej
> sytuacji za pomocą wiadomości zwrotnej. Dziękujemy.
>
> This message, including any attachments hereto, may contain privileged
> or confidential information and is sent solely for the attention and
> use of the intended addressee(s). If you are not an intended
> addressee, you may neither use this message nor copy or deliver it to
> anyone. In such case, you should immediately destroy this message and
> kindly notify the sender by reply email. Thank you.
> The information contained in this electronic message and any attachments to 
> this message are intended for the exclusive use of the addressee(s) and may 
> contain proprietary, confidential or privileged information. If you are not 
> the intended recipient, you should not disseminate, distribute or copy this 
> e-mail. Please notify the sender immediately and destroy all copies of this 
> message and any attachments. WARNING: Computer viruses can be transmitted via 
> email. The recipient should check this email and any attachments for the 
> presence of viruses. The company accepts no liability for any damage caused 
> by any virus transmitted by this email. www.wipro.com
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments. WARNING: Computer viruses can be transmitted via email. The 
recipient should check this email and any attachments for the presence of 
viruses. The company accepts no liability for any damage caused by any virus 
transmitted by this email. www.wipro.com
-- 
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

Reply via email to