[sane-devel] Canon CanoScan 9000F hangs with openSUSE Leap 42.2

Hello, I just changed to openSUSE Leap 42.2, where my Canon CanoScan 9000F stopped working properly. scanimage scanned one page. Then stopped working when starting to scan the next page. Scanner needed to be switched off and on for the next scan. Leap 42.2 comes with sane-backends V 1.0.24.

[sane-devel] hp backend fails to detect HP SCSI scanner

. instead, the fclose and return should be replaced with a warning: { DBG(1,sanei_scsi_find_devices: bad attach\n); } this fixes the problem for me. allan -- Peter Kirchgessner http://www.kirchgessner.net mailto:peter at kirchgessner.net

[sane-devel] [PATCH] make scanimage work with HP ScanJet (HP 6250C), finally

? Kind regards Peter Kirchgessner m. allan noah schrieb: i can confirm that this does help problems i have seen with the 6200C. now the device is very consistent- it shows up and works the first, third, fifth, etc times that i use it. but every 'even' call to Xsane produces the following: [hp

[sane-devel] scanimage -L crashes with HP ScanJet 4100c

+0100, Peter Kirchgessner wrote: export SANE_HP_RDREDO=20 xsane hp This will do 20 retries (2 seconds in total) before giving up. Please try if at least the xsane-GUI comes up. Maybe you then will run into an I/O-error during scanning. Yes, that seemed to help get xsane started, and yes when I

[sane-devel] scanimage -L crashes with HP ScanJet 4100c

-Packard ScanJet 4100C flatbed scanner moseley at bumby2:~$ scanimage image.pnm scanimage: no SANE devices found Hum -- if I try multiple times it sometimes will make the scanner work. Like one in 20 tries. -- Bill Moseley moseley at hank.org -- Peter Kirchgessner http

[sane-devel] scanimage -L crashes with HP ScanJet 4100c

-- if I try multiple times it sometimes will make the scanner work. Like one in 20 tries. -- Bill Moseley moseley at hank.org -- Peter Kirchgessner http://www.kirchgessner.net mailto:peter at kirchgessner.net

[sane-devel] scanimage -L crashes with HP ScanJet 4100c

Moseley moseley at hank.org -- Peter Kirchgessner http://www.kirchgessner.net mailto:peter at kirchgessner.net -- Peter Kirchgessner http://www.kirchgessner.net mailto:peter at kirchgessner.net

[sane-devel] hp backend for HP ScanJet 6200C

-error, permission denied. Before changing the depth you may need to change the scan mode to Color. --Peter Thanks, Mohit -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Problem reading HP ScanJet 6200C/6250C

lost one of my computers to this problem and I am not too eager in loosing others. Thanks, Mohit -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Problem reading HP ScanJet 6200C/6250C

That's unusual. I would not recommend to use SCSI IDs 0 and 7 at all. But if this is the only way for you, who knows why ? --Peter Ulrich Deiters schrieb: My HP 6200C is only recognized properly on the SCSI bus if its SCSI address is 0. Regards, Ulrich Deiters -- Peter

[sane-devel] Problem reading HP ScanJet 6200C/6250C

and maybe also some error messages which may tell you what's going wrong. You also can look at /var/log/messages if the USB-layer is creating some error messages. I hope it helps --Peter Mohit Kumar schrieb: Peter, Its USB. Thanks, Mohit On 5/27/05, Peter Kirchgessner pe

[sane-devel] Output from Scanimage

on? Thanks, Terrence -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Using Sane with HP Scanner

to a file of some sort? Thanks, Terrence -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Using Sane with HP Scanner

Hello, after you have loaded the appropriate modules with modprobe, (epst, etc.) you should see in /var/log/messages which SCSI-device is used for the scanner. Before you don't see your scanner here, you don't need to try scanimage. Kind regards Peter Kirchgessner Terrence van Ettinger

[sane-devel] Fwd: HP scanjet IIcx /t resolution

the image is more than 8 bit but I think is is that many. So I seem stuck with 256 colors, what could be wrong? (BTW - this box has 1Gb memory) // George -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP 6200C under Linux 2.6?

. No problems with SCSI. Bye Peter Ed Suominen schrieb: I've seen a couple of things indicating that there might be problems with the HP 6200C scanner under the Linux 2.6 kernel. Is that likely to be the case, and if so, why? Thanks, Ed -- Peter Kirchgessner http

[sane-devel] hp officejet support

schrieb: how about bringing back the officejet support to the hp backend now that printing on OJ is managed by th hpijs driver there is no need for an extra package for scanning (hpoj not maintained since 0.91) only a suggestion wfg Mario -- Peter Kirchgessner http://www.kirchgessner.net

[sane-devel] Problem with sane, HP5200 and libusb

me with this. Thanks Stefan -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] hp-backend: problem with USB-devices on Linux 2.6.x fixed

Hi, CVS has the hp-backend 1.06 that fixes a problem with USB-scanners on Linux 2.6.x. Thank's to Johannes Niediek for his tests. --Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Sane and HP C6270A 3828

/sane.d/hp.conf and dll.conf if they fit your needs. Sincerely Peter Yao Ko schrieb: On Tue, 2004-03-23 at 13:45, Peter Kirchgessner wrote: Hi, you can check if the hp-backend is called to open the scanner. To do this do SANE_DEBUG_HP=17 export SANE_DEBUG_HP before starting scanimage

[sane-devel] CVS-Server, no space left on device

8855016 2556772 5848424 31% / /dev/sda3131286112 29649112 94968020 24% /org This was after the problem was fixed. All 9 GB of / were really full. No idea what occupied that much space. /tmp has only 1 GB. Bye, Henning -- Peter Kirchgessner http

[sane-devel] Sane and HP C6270A 3828

the following line if hpoj is installed: #hpoj Could anyone give some hints as what's wrong? Thanks, -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] CVS-Server, no space left on device

Hi, when trying a cvs update, I get the message can't create temporary directory /tmp/cvs-serv20910. Can someone please look what is happening on the CVS-server ? Bye Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Sane and HP C6270A 3828

/dll.conf [ko@localhost scsi]# grep hp /etc/sane.d/dll.conf hp hpsj5s # HP OfficeJet backend homepage: http://hpoj.sf.net/ # Uncomment the following line if hpoj is installed: #hpoj Could anyone give some hints as what's wrong? Thanks, -- Peter Kirchgessner http

[sane-devel] HP scanjet IIp and ADF / lamp moves back after each page

(calibrating ?) of the lamp after each page? It would be really great if someone could help me thanks Sascha -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Compiling sane-backends CVS 2003/10/22 on OS/2

schrieb: Hi, On Wed, 22 Oct 2003 22:25:23 +0200, Peter Kirchgessner wrote: hp-backend has now been changed in CVS to use new sanei_thread-interface. Franz, could you please test it on OS/2 ? Now it compiles again without errors, thanks. I will try to contact someone with a hp-scanner

[sane-devel] Compiling sane-backends CVS 2003/10/22 on OS/2

int ... has to be changed to static void ... No, why do you think so? 2. sane-backends\backend/hp-handle.c Should be fixed (AFAIK will be fixed) by Peter Kirchgessner... I can send you a fixed file also for testing, but as it's not my backend I won't fix it in CVS... 3

[sane-devel] HP ScanJet 4100C - assertion failed

to reboot my Linux to get back the device !! What's wrong ? Do I have to patch something in my kernel ? In attachment, the complete scanimage -L stdout/sdterr with SANE_DEBUG_HP=17 Thank you in advance for your help -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe

[sane-devel] HP scanjet 5470c

support for this scanner. Thanks Aneesh -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] USB Scanner Problem

without any luck. thanks allot jan ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] USB Scanner Problem

? Sincerely Peter Jan Rüdiger schrieb: Hi Peter Kirchgessner wrote: Hi Jan, is this scanner really a HP ScanJet 4200c. USB says that it is a ScanJet 6200c. But that doesn't matter. After the first (and only) scan has completed, do the following: yes it is a 6200c, sorry. My

[sane-devel] HP PSC 1210

- ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP2300C with mdk9.1

. ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP Scanjet 4c issue?

that could be fixed? is this likely to be an unfixable hardware bug? I'm running xsane version 0.84 Many thanks, Matthew -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP Scanjet 4c issue?

the machine. Peter Matthew Vernon schrieb: Peter Kirchgessner writes: Hi, I would assume it is a hardware bug that can be fixed. Check the scan element or the mirror for dust and clean it carefully. Thanks for the pointer. Is there any web-documentation on how to take

[sane-devel] SANE_I18N for hp-backend

Hi, the hp-backend has been prepared for i18n in CVS. Bye Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] scanner flakiness in mandrake 9.x

SIGNATURE- ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Does sane_read return multiple scanlines?

as parm.pixels_per_line or parm.pixels_per_line*3, is this correct? Thanks, Peter ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe

[sane-devel] hp backend bug? (was: DLL backend doesn't work on 680x0 machines)

[] Shut off scanner lamp. Geometry: -l 0..215.788mm (in steps of 1.52588e-05) [0] Top-left x position of scan area. [ a few more options here ] Thanks! -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] hp backend bug? (was: DLL backend doesn't work on 680x0 machines)

, Henning ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Gradually increasing scan times

a look at /etc/sane.d/dll.conf. Make sure that the hp-backend is not commented out. Sincerely Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Gradually increasing scan times

...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Scanned colours?

-- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] does order of options for scanimage matter?

-- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] What am I missing?

added to /etc/ld.so.conf ldconfig was run Any idea what the next item of destruction is? Thanks, Dave -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Putting a scan into a tiff file

Hi Joachim, Joachim Backes schrieb: On 19-Feb-2003 Peter Kirchgessner wrote: Hi Joachim, thank you for the test file. You are saving the TIFF-files with a JPEG-compression in xsane. At least xpaint is not capable of handling JPEG-compressed TIFF-files correctly. And: ImageMagick

[sane-devel] OS/2-support for hp-backend

Hi, due to the commitment of Franz Bakan, the hp-backend V1.02 now has support for OS/2. hp-backend V1.02 is available in CVS. --Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Where can I find ppscsi driver?

. Have you seen this kind of error before? Thanks for your help, Hida --- Peter Kirchgessner pe...@kirchgessner.net wrote: Hi Hida, you can try it, but I don't know if it works. Enclosed you will find the objects. At my systems they are located at /lib/modules/2.4.18-4GB/kernel/drivers

[sane-devel] Where can I find ppscsi driver?

primitive knowledge of Linux, does that mean I have to apply the patch to source code and build a custom linux image? How hard is it to do so? Thank you. Hida --- Peter Kirchgessner pe...@kirchgessner.net wrote: Hi, you can start at http://www.torque.net/parport/ppscsi.html --Peter Hidagus Pa

[sane-devel] HP ScanJet listings in description files

ScanJet 3200C? So a CC goes to the umax_pp maintainer :-) bye, Henning ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe

[sane-devel] HP ScanJet IIcx /T --- any hope?

the docs for HP scanners available... Abel ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP ScanJet listings in description files

part of the model name? Or is it just the manufacturer name? Anyway, we should agree on one solution. Bye, Henning ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter

[sane-devel] HP ScanJet listings in description files

Hi, Henning Meier-Geinitz schrieb: Hi, On Sun, Jan 05, 2003 at 11:11:47AM +0100, Peter Kirchgessner wrote: HP is just for the manufacturer. Because on the listing nearly noone else uses the manufacturer name in the models list, I would agree to name all just ScanJet Ok. So you

[sane-devel] HP ScanJet IIcx /T --- any hope?

, with stderr redirected to a logfile) and send me the logfile ? Abel PS: Which Sane version are you using? scanimage --version tells the version number. -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] usb_control/bulk_msg: timeout

loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x03f0, product=0x0101) at /dev/usb/scanner0 found USB scanner (vendor=0x03f0, product=0x0101) at libusb:003:003 $ scanimage -L device `hp:/dev/usb/scanner0' is a Hewlett-Packard MODELx flatbed scanner -- Peter

[sane-devel] usb_control/bulk_msg: timeout

Hi, seems really to be a problem with the USB-connection. At that point I can't help further. Sincerely Peter Bill Moseley schrieb: On Thu, 2 Jan 2003, Peter Kirchgessner wrote: Hi, your configuration is ok. Otherwise scanimage would not find the scanner. But you can try to access

[sane-devel] need help with HP6350 USB Scanjet - please

2K. Thanks in advance. Reid Vail ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP PSC 700 Series

from you soon! Best regards Raffaele ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Problem with sane-1.0.9, PPC, ScanJet 4C

Cheers, Keith -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Help getting my scanner recognized

and ran under windows that last time I booted into Windows. Help, Scott p.s. I am running xsane 0.89. ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http

[sane-devel] hp-backend, Error during device I/O, Workaround

or an error occurs. If an error has occured and data has been received, the error is ignored and the data is processed. Please give the backend a try and report problems back. --Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] hp scanner

-- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Resend: scanjet 5p, io-error

Hi, could be a similar problem. But this time the SCSI interface is a Initio-9100uw on FreeBSD 4.6.2. --Peter abel deuring schrieb: Peter Kirchgessner wrote: Hi, seems to be a SCSI problem. Opening the SCSI-device is ok. Writing seems also to work. But reading is a problem. You can

[sane-devel] Compilation warnings

1warning: assignment from incompatible pointer type Bye, Henning ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe

[sane-devel] Resend: scanjet 5p, io-error

-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP 4C, (C1130A) Sane-1.0.9 OS/2 Assertion failed: info, file hp-scl.c, line 1317

, Franz ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP 4C, (C1130A) Sane-1.0.9 OS/2 Assertion failed: info, file hp-scl.c, line 1317

Peter Franz Bakan schrieb: On Wed, 06 Nov 2002 07:13:40 +0100, Peter Kirchgessner wrote: can you try to start it as scanimage -d hp 1test.pnm 2errors.255 Ich hab's weitergeleitet, die darauffolgende errors.255, die mir der Tester geschickt hat, sieht genau gleich aus (bis auf die

[sane-devel] HP scanjet 3570c (USB)

be supported. Sincerely Peter Kirchgessner mem...@gmx.net schrieb: Hi mailinglist, I'm using a HP Scanjet 3570c. It is connected with usb. I use it at a Suse 8.1 Linux 2.4.18 . My current sane version is sane 1.0.7-59. According the sane homepage my scanner is not supported. Anyway I

[sane-devel] HP 4C, (C1130A) Sane-1.0.9 OS/2 Assertion failed: info, file hp-scl.c, line 1317

://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] resend: remove OfficeJet support from SANE hp backend

with #ifdef HAVE_PTAL. I'll let Peter Kirchgessner decide what to do about it, but it wouldn't hurt to leave it there for now. (Peter: at some point you might also want to update http://www.kirchgessner.net/sanehpfaq.html accordingly.) Please apply this patch to CVS, or let me know if I need

[sane-devel] resend: remove OfficeJet support from SANE hp backend

didn't actually change any code in the hp backend, because the affected code is wrapped with #ifdef HAVE_PTAL. I'll let Peter Kirchgessner decide what to do about it, but it wouldn't hurt to leave it there for now. (Peter: at some point you might also want to update http

[sane-devel] Re: HP Scanjet 4 - Fails to scan with HP-SCL error '10'

. -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] SANE HP 4P SCSI scanner error message

Hi, seems that the response from the scanner was not correctly passed back. Please have a look at http://www.kirchgessner.net/pub/sane/53c416.txt and check if you have configured your card in a similar way. --Peter Johan van den Berg wrote: Hi, I'm geeting the following error message

[sane-devel] Re: hp compilation pb in CVS

. -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP ScanJet 6100C Configuration

thought this might be best. Thanks Frank -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP ScanJet 6100C Configuration

that it has the line with hp activated. --Peter 4 as root did chmood 666 /dev/sg0 From this I would be happy to report glad tidings but alas this is not so. I received exactly the same results - no change. Thanks Frank On Sunday 04 August 2002 04:06, Peter Kirchgessner wrote: Hi Frank

[sane-devel] HP ScanJet 6100C Configuration

August 2002 01:14, Peter Kirchgessner wrote: Don't remove the files. You need at least dll.conf too. And check that it has the line with hp activated. --Peter Frank Roberts - SOTL wrote: Thanks for the help Peter. I did the following: 1. Changed /dev/scanner to /dev/sg0 2. Made directory sane.d-bak

Fwd: Re: [sane-devel] HP-Backend asks for a Password (Probably a Bug)

--- -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP ScanJet 6100C Configuration

___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Re: Debian SANE HP bug report

version of the SANE HP backend (sane-backends 1.0.7). Maybe it's interesting for you: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=154827repeatmerged=yes and http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=154828repeatmerged=yes Bye, Henning -- Peter Kirchgessner http

[sane-devel] HP-Backend asks for a Password (Probably a Bug)

list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Current TODO list

unsupported Astra 610P has been tagged as :unsupported Ok. Bye, Henning ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net

[sane-devel] Sand on Solaris 9

for USB scanners: sane-find-scanner: done should it not look in /dev/scsi as well on Solaris? Thanks -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP Scanjet 6300C Lineart/halftone stepping

__ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter

[sane-devel] HP Scanjet C6270A on Redhat 6.2

http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP Scanjet C6270A on Redhat 6.2

___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] hp-backend not compiled with PTAL support

/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP scanjet 5400c

...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Help needed w/ HP ScanJet 4200c and SANE-1.0.7

in the filename, so I don't know if I even needed to apply the patch. Thanks in advance for your time. Peace Tom ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter

[sane-devel] SCSI: error during device I/O

of SANE was used. Currently the only advice I can give is trying to use a different SCSI card. --Peter Douglas Gilbert wrote: Peter Kirchgessner wrote: Hello, some time ago problems have been reported with some 2.4.x kernels and SCSI-devices. What was working with 2.2.x, failed

[sane-devel] SCSI: error during device I/O

and 2.4.13). Does anybody know if the problem has been fixed ? And if so, at which kernel ? The ChangeLogs don't tell me much. --Peter -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP 6350C/XPA adapter

problem has been addressed in 1.0.7. No rush, just curious. :-) Thanks! -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] uploading color transformation matrix on HP 4c/3c --- mapping color - greyscale

) and -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] installing hp - scanner

change this so why is my scanner still not detected isn`t the driver installed with sane backends? Frank ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http

[sane-devel] Help With HP ScanJet 3C - Getting Started

...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] Re:Support for HP 7490?

appreciated. Thanks, Tony ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] HP ScanJet 4p no sane devices found

http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net

[sane-devel] fillorder missing in scanimage

Hi, the patch has been applied in CVS with some minor changes. --Peter Peter Kirchgessner wrote: Hi Jacek, I would prefer that the bug in tifftopnm should be fixed. scanimage does snip Jacek Pliszka wrote: Hi! I posted a message some time ago but I got no reply. This is what I

[sane-devel] fillorder missing in scanimage

someone apply it? Thanks for a great tool! Best Regards, Jacek P.S. Why don't you use libtiff ? ___ Sane-devel mailing list sane-de...@www.mostang.com http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http

[sane-devel] Q: Performance Tip wanted, USB vs. SCSI HP 63xx Scanner

-- Jürgen Sauer - AutomatiX GmbH, +49-4209-4699, j...@automatix.de ** ** Das Linux Systemhaus - Service - Support - Server - Lösungen ** http://www.automatix.de to Mail me: remove: -not-for-spawm- ** -- Peter Kirchgessner http://www.kirchgessner.net mailto:pe...@kirchgessner.net (alternate e-mail

  1   2   >