I would go and using v 11 create new tables using key from main table move data and then upgrade. I would lastly delete the old sub table and mark the link as unused
Sent from my iPhone > On Oct 17, 2018, at 4:36 PM, Timothy Penner via 4D_Tech > <4d_tech@lists.4d.com> wrote: > > The main conversion of subtables took place when upgrading to v11, this was > automatic. > ^ This only applied to sincle-level subtables as anything beyond the first > level was lost: http://kb.4d.com/assetid=49513 > > The rest of the conversion needs to be done by the developer and consists of > replacing the subtable commands and redrawing the relationship line. This is > not automatic. > > -Tim > > > > > > > > -----Original Message----- > From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Spencer Hinsdale > via 4D_Tech > Sent: Wednesday, October 17, 2018 1:11 PM > To: 4D iNug Technical <4d_tech@lists.4d.com> > Cc: Spencer Hinsdale <spen...@bigsoftware.com> > Subject: Re: Help->v11 to v17 Upgrade or New? > > > 4D automatically converts Subtables. This should not be a problem. > ********************************************************************** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ********************************************************************** ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **********************************************************************
