Not a problem, not cheap.
What kind of form factor?
What kind of in and out voltages? Certainly doable.
I think Forrest has something similar in his latest stuff.
Would you want it to pull it off of the Ethernet cable and then put it back
on the Ethernet cable at a different voltage?
-----Original Message-----
From: Robert Andrews
Sent: Sunday, June 24, 2018 4:50 PM
To: AFMUG
Subject: Re: [AFMUG] ePMP voltages again - specifically 2ghz
oh. or any 48 and makes it +48.... i.e pass through if already ok...
On 06/24/2018 02:45 PM, Gino A. Villarini wrote:
How about a dc-dc poe/SS that takes –48 and converts to +48, 24v etc ?
From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> on
behalf of Chuck McCown <ch...@wbmfg.com <mailto:ch...@wbmfg.com>>
Date: Thursday, June 21, 2018 at 12:53 PM
To: Mathew Howard <mhoward...@gmail.com <mailto:mhoward...@gmail.com>>,
David Milholen <dmilho...@wletc.com <mailto:dmilho...@wletc.com>>
Cc: AFMUG <af@af.afmug.com <mailto:af@af.afmug.com>>
Subject: Re: [AFMUG] ePMP voltages again - specifically 2ghz
*//*
*/Gino A. Villarini/*
President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
Me too...
So, what appetite is there for an inline POE regulator that would convert
48 to 24?
*From:* Mathew Howard
*Sent:* Thursday, June 21, 2018 10:50 AM
*To:* Dave
*Cc:* AFMUG
*Subject:* Re: [AFMUG] ePMP voltages again - specifically 2ghz
ugh... I keep forgetting to use reply-to-all...
Not every single UBNT radio... all the airfibers will happily take 48v.
Mikrotik is finally starting to make most of the new stuff handle 48v
(including the PowerBox Pro), but yeah. UBNT is the reason I still have to
use 24v on most of our towers... they make a converter you can stick on in
line with the radios, but that's kind of a pain if you have more than one
or two, and it's an extra part to fail.
On Thu, Jun 21, 2018 at 11:46 AM, Dave <dmilho...@wletc.com> wrote:
They make dental floss for that :)
On 06/21/2018 11:39 AM, Josh Luthman wrote:
Except for every single Ubnt device and a majority of Mikrotiks....
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Jun 21, 2018 at 12:39 PM, Josh Baird <joshba...@gmail.com>
wrote:
I promise life will be easier if you just use 48V. :)
On Thu, Jun 21, 2018 at 12:35 PM, Josh Luthman
<j...@imaginenetworksllc.com> wrote:
I'm trying to use a Powerbox Pro to power up two epmp
APs. The 5 GHz is just fine but the 2 GHz is saying
current too low. Both ports are getting 23 volts and the
cables are <10 feet (from the Powerbox Pro).
Does anyone know if the 2ghz requires more voltage possibly?
Spec sheet does say 23 volts min but it's weird one powers
(5 ghz) and the other doesn't.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Suite 1337
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
Troy, OH 45373
<https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g>
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
--
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
<http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
