I have a thousand new POEs. What do you want me to try?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Sep 13, 2018 at 11:07 AM, <ch...@wbmfg.com> wrote: > Do you have a spare POE to try ? > > *From:* Josh Luthman > *Sent:* Thursday, September 13, 2018 6:10 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV > > Well there was no lightning or anything, beautiful weather. After several > cards I have to imagine it's the POE or the AP. We replaced those two at > the same time. > > Does it make sense the POE was doing something weird to fry them or more > sense the AP was pulling too many amps? AP seems perfectly fine in the > office for 36 hours, so I'm inclined to believe it's the POE. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Sep 11, 2018 at 2:51 PM, Chuck McCown <ch...@wbmfg.com> wrote: > >> It resets immediately if it is going to reset. >> Sounds like it took a hit. >> >> *From:* Josh Luthman >> *Sent:* Tuesday, September 11, 2018 12:45 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV >> >> How long does it need to be cold for it to be self reset? The one I took >> down this morning looks perfectly clean and I can't get pins 7/8 through >> it. At this point I'm thinking the (AC) POE is the cause of all our issues >> (Cambium, so that pair is positive 24v and data). >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Sep 11, 2018 at 10:47 AM, Chuck McCown <ch...@wbmfg.com> wrote: >> >>> Sure, you can also wash them with 90% isopropyl alcohol. That will >>> remove any water. Need to make sure there is no corrosion. >>> Wash out the jacks extra good too. >>> >>> If they have not had too large of a surge, they are totally self >>> resetting. >>> >>> *From:* Josh Luthman >>> *Sent:* Tuesday, September 11, 2018 7:25 AM >>> *To:* AFMUG >>> *Subject:* [AFMUG] Surge suppression failure gigE APC HV >>> >>> There's a cause and I'm pretty confident it's not the cards themselves. >>> >>> This weekend an AP started having eth link issues. Look at it and the >>> card/rj45 is full of water. Replaced the line. Problem returns about 12 >>> hours later. >>> >>> I plug in my continuity tester and pin 7 blinks quickly and fades away. >>> Headed up the tower now for a new AP and already did a new Poe (no power >>> until AP replaced). >>> >>> Is it possible the Poe/AP are damaging the surge card? We've gone >>> through 5-6 cards since Saturday, and I thought it was all water related. >>> It stopped raining on Sunday after card 3 + new line. >>> >>> Any other ideas? Can I wait a minute and reuse the dry cards, are they >>> self resetting (I tried power cycling the POE for 5 seconds with no change) >>> after a length of time? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> >> ------------------------------ >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
