Should only be 24v.  Even if it doubled, should be OK on the radio and
surge card.

What's the Netonix problem?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Fri, Sep 14, 2018, 12:44 PM <ch...@wbmfg.com> wrote:

> If the voltage was too high or had spikes it could certainly have done
> that.
> Kinda the reverse of the Netonix problem.
>
> *From:* Josh Luthman
> *Sent:* Friday, September 14, 2018 10:37 AM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV
>
> I replaced the POE, AP, and surge card on Tuesday.  That's what fixed it
> for sure.
>
> The AP is sitting here in the lab and doing gigabit for 3 days now,
> happily.  The POE and surge card are in the trash.
>
> I'm wondering if it's possible the POE fried all of those surge cards on
> Saturday/Sunday/Monday/Tuesday.  If that's possible?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Thu, Sep 13, 2018 at 2:21 PM, <ch...@wbmfg.com> wrote:
>
>> You say you are inclined to think it is the POE.  I presume that means
>> the POE power supply.  So try a new one.  I am probably not understanding
>> the situation.
>>
>> *From:* Josh Luthman
>> *Sent:* Thursday, September 13, 2018 11:39 AM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV
>>
>> I have a thousand new POEs.  What do you want me to try?
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Thu, Sep 13, 2018 at 11:07 AM, <ch...@wbmfg.com> wrote:
>>
>>> Do you have a spare POE to try ?
>>>
>>> *From:* Josh Luthman
>>> *Sent:* Thursday, September 13, 2018 6:10 AM
>>> *To:* AnimalFarm Microwave Users Group
>>> *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV
>>>
>>> Well there was no lightning or anything, beautiful weather.  After
>>> several cards I have to imagine it's the POE or the AP.  We replaced those
>>> two at the same time.
>>>
>>> Does it make sense the POE was doing something weird to fry them or more
>>> sense the AP was pulling too many amps?  AP seems perfectly fine in the
>>> office for 36 hours, so I'm inclined to believe it's the POE.
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Tue, Sep 11, 2018 at 2:51 PM, Chuck McCown <ch...@wbmfg.com> wrote:
>>>
>>>> It resets immediately if it is going to reset.
>>>> Sounds like it took a hit.
>>>>
>>>> *From:* Josh Luthman
>>>> *Sent:* Tuesday, September 11, 2018 12:45 PM
>>>> *To:* AnimalFarm Microwave Users Group
>>>> *Subject:* Re: [AFMUG] Surge suppression failure gigE APC HV
>>>>
>>>> How long does it need to be cold for it to be self reset?  The one I
>>>> took down this morning looks perfectly clean and I can't get pins 7/8
>>>> through it.  At this point I'm thinking the (AC) POE is the cause of all
>>>> our issues (Cambium, so that pair is positive 24v and data).
>>>>
>>>>
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>>
>>>> On Tue, Sep 11, 2018 at 10:47 AM, Chuck McCown <ch...@wbmfg.com> wrote:
>>>>
>>>>> Sure, you can also wash them with 90% isopropyl alcohol.  That will
>>>>> remove any water.  Need to make sure there is no corrosion.
>>>>> Wash out the jacks extra good too.
>>>>>
>>>>> If they have not had too large of a surge, they are totally self
>>>>> resetting.
>>>>>
>>>>> *From:* Josh Luthman
>>>>> *Sent:* Tuesday, September 11, 2018 7:25 AM
>>>>> *To:* AFMUG
>>>>> *Subject:* [AFMUG] Surge suppression failure gigE APC HV
>>>>>
>>>>> There's a cause and I'm pretty confident it's not the cards
>>>>> themselves.
>>>>>
>>>>> This weekend an AP started having eth link issues.  Look at it and the
>>>>> card/rj45 is full of water.  Replaced the line.  Problem returns about 12
>>>>> hours later.
>>>>>
>>>>> I plug in my continuity tester and pin 7 blinks quickly and fades
>>>>> away.  Headed up the tower now for a new AP and already did a new Poe (no
>>>>> power until AP replaced).
>>>>>
>>>>> Is it possible the Poe/AP are damaging the surge card?  We've gone
>>>>> through 5-6 cards since Saturday, and I thought it was all water related.
>>>>> It stopped raining on Sunday after card 3 + new line.
>>>>>
>>>>> Any other ideas?  Can I wait a minute and reuse the dry cards, are
>>>>> they self resetting (I tried power cycling the POE for 5 seconds with no
>>>>> change) after a length of time?
>>>>>
>>>>> Josh Luthman
>>>>> Office: 937-552-2340
>>>>> Direct: 937-552-2343
>>>>> 1100 Wayne St
>>>>> Suite 1337
>>>>> Troy, OH 45373
>>>>> ------------------------------
>>>>> --
>>>>> AF mailing list
>>>>> AF@af.afmug.com
>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>>
>>>>> --
>>>>> AF mailing list
>>>>> AF@af.afmug.com
>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>>
>>>>>
>>>> ------------------------------
>>>> --
>>>> AF mailing list
>>>> AF@af.afmug.com
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>>> --
>>>> AF mailing list
>>>> AF@af.afmug.com
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>>>
>>> ------------------------------
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>>
>> ------------------------------
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>>
>
> ------------------------------
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to