Surges cause the surge components to do their job, which is to short everything
to ground.
Netonix ports will blow if they are shorted.
From: Josh Luthman
Sent: Monday, September 17, 2018 6:58 AM
To: AFMUG
Subject: Re: [AFMUG] Surge suppression failure gigE APC HV
Should only be 24v. Even if it doubled, should be OK on the radio and surge
card.
What's the Netonix problem?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Sep 14, 2018, 12:44 PM <ch...@wbmfg.com> wrote:
If the voltage was too high or had spikes it could certainly have done that.
Kinda the reverse of the Netonix problem.
From: Josh Luthman
Sent: Friday, September 14, 2018 10:37 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Surge suppression failure gigE APC HV
I replaced the POE, AP, and surge card on Tuesday. That's what fixed it for
sure.
The AP is sitting here in the lab and doing gigabit for 3 days now, happily.
The POE and surge card are in the trash.
I'm wondering if it's possible the POE fried all of those surge cards on
Saturday/Sunday/Monday/Tuesday. If that's possible?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Sep 13, 2018 at 2:21 PM, <ch...@wbmfg.com> wrote:
You say you are inclined to think it is the POE. I presume that means the
POE power supply. So try a new one. I am probably not understanding the
situation.
From: Josh Luthman
Sent: Thursday, September 13, 2018 11:39 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Surge suppression failure gigE APC HV
I have a thousand new POEs. What do you want me to try?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Sep 13, 2018 at 11:07 AM, <ch...@wbmfg.com> wrote:
Do you have a spare POE to try ?
From: Josh Luthman
Sent: Thursday, September 13, 2018 6:10 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Surge suppression failure gigE APC HV
Well there was no lightning or anything, beautiful weather. After
several cards I have to imagine it's the POE or the AP. We replaced those two
at the same time.
Does it make sense the POE was doing something weird to fry them or more
sense the AP was pulling too many amps? AP seems perfectly fine in the office
for 36 hours, so I'm inclined to believe it's the POE.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Sep 11, 2018 at 2:51 PM, Chuck McCown <ch...@wbmfg.com> wrote:
It resets immediately if it is going to reset.
Sounds like it took a hit.
From: Josh Luthman
Sent: Tuesday, September 11, 2018 12:45 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Surge suppression failure gigE APC HV
How long does it need to be cold for it to be self reset? The one I
took down this morning looks perfectly clean and I can't get pins 7/8 through
it. At this point I'm thinking the (AC) POE is the cause of all our issues
(Cambium, so that pair is positive 24v and data).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Sep 11, 2018 at 10:47 AM, Chuck McCown <ch...@wbmfg.com> wrote:
Sure, you can also wash them with 90% isopropyl alcohol. That will
remove any water. Need to make sure there is no corrosion.
Wash out the jacks extra good too.
If they have not had too large of a surge, they are totally self
resetting.
From: Josh Luthman
Sent: Tuesday, September 11, 2018 7:25 AM
To: AFMUG
Subject: [AFMUG] Surge suppression failure gigE APC HV
There's a cause and I'm pretty confident it's not the cards
themselves.
This weekend an AP started having eth link issues. Look at it and
the card/rj45 is full of water. Replaced the line. Problem returns about 12
hours later.
I plug in my continuity tester and pin 7 blinks quickly and fades
away. Headed up the tower now for a new AP and already did a new Poe (no power
until AP replaced).
Is it possible the Poe/AP are damaging the surge card? We've gone
through 5-6 cards since Saturday, and I thought it was all water related. It
stopped raining on Sunday after card 3 + new line.
Any other ideas? Can I wait a minute and reuse the dry cards, are
they self resetting (I tried power cycling the POE for 5 seconds with no
change) after a length of time?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
----------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
----------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
