What is the upper end of this band?

From: Mathew Howard 
Sent: Wednesday, February 5, 2020 1:41 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] Mikrotik 60 ghz Wireless Wire Performance.

They work, and they're cheap. Although, I would probably recommend using 
IgniteNets instead, at this point, because they can (legally) use channel 4.5 
(66ghz) now, which is desirable at that distance... the Mikrotiks do work on 
66ghz too, but it's not exactly legal at this point.

The nice thing about the Mikrotiks, is that the beamforming antenna makes them 
a lot easier to align than the Ignitenets, but I think the Ignitenets are a bit 
more reliable overall, and the cost for the 1Gbps radios isn't that much 
different


On Wed, Feb 5, 2020 at 2:27 PM Mike Meluskey <m...@broadband.vi> wrote:

  We have Ignitenet 60Ghz PTP links working up to 1 mile.


  On Wed, Feb 5, 2020 at 4:24 PM Robert Andrews <i...@avantwireless.com> wrote:

    We had them running at 800 meters and they were very touchy on alignment 
    and tended to go up and down a bit on speeds but went to top speeds with 
    a reboot.   Benchmarked as advertised.   Now running them at 500-600 
    meters and they are very happy even through light to medium rain and 
    snow.  Solid even.

    On 02/05/2020 08:53 AM, David Coudron wrote:
    > We haven’t set them up at 1000 meters yet, but short range testing that 
    > we have done shows them passing near 1G of traffic using iPerf.   So 
    > they can do that speed with the right link characteristics.   We will 
    > eventually get them out and see what they can do on longer runs, but 
    > haven’t messed with that yet.
    > 
    > Regards,
    > 
    > David Coudron
    > 
    > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Sam Lambie
    > *Sent:* Wednesday, February 5, 2020 10:48 AM
    > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
    > *Subject:* [AFMUG] Mikrotik 60 ghz Wireless Wire Performance.
    > 
    > I have a couple of institutions that can't afford a licensed point to 
    > point solution to get near a gigabit of throughput. So, trying to save 
    > the 5ghz spectrum for our PTMP network, I am looking at these 
    > https://mikrotik.com/product/wireless_wire_dishas a possibility. the 
    > shots would right around 1000 meters. Does anyone have any real world 
    > experience with these radios that you would like to share? Any other non 
    > 5ghz and 24ghz solutions out there that you have used to get near a 
    > gigabit FDX?
    > 
    > Thanks
    > 
    > -- 
    > 
    > -- 
    > *Sam Lambie*
    > Taosnet Wireless Tech.
    > 575-758-7598 Office
    > www.Taosnet.com <http://www.newmex.com>
    > 
    > 
    > 

    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--------------------------------------------------------------------------------
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to