That would make sense. The AP/SM thing is just a Cambium/CNmaestro thing. CBRS doesn't care who the parent is, it needs to know the bearing/elevation/position.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Aug 13, 2020 at 10:46 AM Kurt Fankhauser <lists.wavel...@gmail.com> wrote: > so all you do is put up a 2nd AP and once its online change the Color Code > to the same code the old SM's are and the sms move over to the new AP and > the CBRS data transfers over automatically in Maestro? > > > On Wed, Aug 12, 2020 at 6:14 PM Ken Hohhof <af...@kwisp.com> wrote: > >> Matt thanks, we did that today and all the SMs just moved automagically >> to the replacement AP. >> >> >> >> We imported a sector consisting of just the empty AP, and pre approved >> onboarding in cnMaestro. It was Authorized and Waiting for Device. Once >> the new AP was plugged in, it synced and enabled CBRS and the SMs moved >> over without any manual intervention. Pretty cool. >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Matt Mays >> *Sent:* Monday, August 10, 2020 11:19 AM >> *To:* af@af.afmug.com >> *Subject:* Re: [AFMUG] replacing a CBRS AP >> >> >> >> In my experience, you just CPI file a new empty AP and sync it once you >> have it in place. >> The SMs should move to the new AP in the SAS admin tool once they >> register and the grants get re-used. >> >> Then once the old AP is empty in cnMaestro SAS Admin tool you deregister >> the old AP and delete it from the system. >> >> No reason to refile all of the subs just to swap out the AP. >> >> Thanks, >> Matt Mays >> Amplex Internet >> >> On 8/10/2020 11:18 AM, dave wrote: >> >> Ken, >> since the addition of the export button in the management tool it makes >> it easy todo. >> The key is ensuring you have a current sheet with all of your sector info >> and subs info up to date. >> update the sheet with new AP and your ready to go. >> >> Of course to answer your question to make a smoother transition is to >> place the new ap into part 90 >> so you obtain all of your subs then update your management tool. >> >> I am sure someone here may correct me if im wrong. >> >> Thanks >> Dave >> >> >> On 8/10/20 8:46 AM, Ken Hohhof wrote: >> >> Has anyone figured out the best procedure for replacing a Cambium CBRS AP? >> >> >> >> I’m guessing there is something more elegant and less disruptive than >> deleting the whole sector while the tech is swapping out the AP and then re >> importing into cnMaestro from a spreadsheet and hoping everything goes >> smoothly and customers are only down for a few minutes. >> >> >> >> I’m talking about replacing an AP that is in service but with issues. >> Over the years we’ve run into RF issues with the original connectorized 450 >> APs. I’ve never established whether it’s the AP or the sector antenna, but >> replacing it solves the modulation and V/H ratio issues. >> >> >> >> The same procedure would also apply if you are upgrading to a 450i or >> 450m AP. >> >> >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com