Do you want to all over this thing or use it as an external loud dining bell. Maybe the UNA function makes it also serve as a bell but you would need an fxo to trigger that.
Sent from my iPhone > On Dec 27, 2020, at 9:56 AM, Nate Burke <n...@blastcomm.com> wrote: > > So I actually need a device which would ACCEPT the dialtone/ring and that > would go on the Page Tip/Page Ring contacts. Any Idea what UNA Ringing is? > Googling just returns a bunch of Spanish results. Would that broadcast the > phone ringing sound over the PA? So connect a normal FXS Port to that? > > On 12/23/2020 2:34 PM, Chuck McCown wrote: >> If you configure an ATA that will actually draw dial tone from a POTS line, >> then it will work with this paging adapter. I think that would be an FXS >> config. FXO would give you dial tone from the ATA. Been a very long time >> since I use the linksys/cisco spa products to extend dial tone over the >> internet, but they seemed to work fine. >> >> From: Daniel White >> Sent: Wednesday, December 23, 2020 1:23 PM >> To: AnimalFarm Microwave Users Group ; Nate Burke >> Subject: Re: [AFMUG] Old Phone Question >> >> Algo (https://www.algosolutions.com/) and CyberData >> (https://www.cyberdata.net/collections/sip) are the go to brands for paging >> equipment that is SIP compatible along with adapters. Viking Electronics >> (https://www.vikingelectronics.com/) does make a number of items that make >> it easy to work with old paging systems. I didn't look at the manual, but >> the RAD-1A (https://www.vikingelectronics.com//products/rad-1a/) from Viking >> is probably what you are looking for paired with an ATA. >> >> Depending on the layout and configuration of what you are working with you >> can do certain things with a standard ATA (usually just FXS ports) and >> certain things with an ATA with an FXO port (these usually have FXS ports as >> well). >> >> As far as Atheral goes... I won't support trying to jury rig an ATA into >> these situations typically just because they can be finicky and I can't see >> how someone is installing something. Although some ATA manufacturers have >> different terms for configurations that should do what you want, in my >> experience they typically don't behave the way I'd expect. Algo, CyberData, >> and Viking make all of this stuff simple so it is just better to go that >> route. >> >> >> Daniel White >> Co-Founder >> phone: +1 (702) 470-2770 >> direct: +1 (702) 470-2766 >>> Nate Burke December 22, 2020 at 17:02 >>> So I'm not saying it's old.... but this was put in when I was still in High >>> School >>> >>> Valcom V-2001 paging system. I'm looking to convert the driving phone >>> system over to VoIP. >>> >>> I've found the manual here. https://www.valcom.com/pdf/v-2001.pdf >>> >>> It references terms I'm not familiar with. It says 'Compatible with Any >>> Electronic Key or PABX' Does that mean that I can use an ATA to plug into >>> it? Or is this something special? >>> >>> There are currently wires hooked up to contacts labeled 'Page Tip/Page >>> Ring' And 'UNA Ringing' (2 wires) I"m guessing Page Tip/ring are the 2 >>> wires that would run to the ATA, but what is UNA Ringing? >>> >>> Anybody hooked one of these up to an ATA before? >>> >>> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
