Also, what gauge wire? -- Paul Dowling dowl...@believebroadband.com Believe Broadband www.believebroadband.com (410) 902-0070 x115
On Tue, Jan 10, 2023 at 1:00 PM Chuck McCown via AF <af@af.afmug.com> wrote: > I build a piece of industrial equipment. Currently the motion control PCB > is in the steering column. I am thinking of potting it and putting it > underneath the chassis. Easy to get to etc. But what kind of connector > should I use? Flying leads coming out of the potting compound into a > cannon type connector? Hate to use any connector that is non ip67, so > phoenix plugs are out. > > Not sure I am going to do this but we are kicking it around. I might just > leave it where it is. It has phoenix connectors now with wires and ferules > going to screw down terminals etc. > > Best Regards, > Chuck McCown > > McCown Technology Corporation > 8401 N Commerce Dr > Lake Point, Utah 84074 > 801-250-9503 Office > 435-830-4306 Cell > www.mccowntech.com > www.microtrench.pro > www.terabitnetworks.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com