Hi Bill - 1) coming in 13.2 2) coming in 13.2, NAT table size is configurable from 1024 - 8192 entries, there is a configuration OID, and will be a current table size oid 3) possibly coming in 13.3, can't promise that yet 4) coming in 13.3, planning to have something at WISPAPALOOZA to demo, more than just a config file. I sent some information about this awhile back. 5) we are working on an external frame calc tool but not sure of the timeline of that. Will make sure to add this idea to that list (point to an AP to use as a "starting point").
I'll send more details on #4 soon and we will be publishing the config file format. Regards, -Aaron -----Original Message----- From: Af [mailto:af-bounces+aaron.schneider=cambiumnetworks....@afmug.com] On Behalf Of Bill Prince via Af Sent: Wednesday, September 17, 2014 6:31 PM To: Motorola III Subject: [AFMUG] Dear Cambium Please let us know if: 1. The femtocell fix is in the pipe (or not) 2. There will be a trap on NAT table full, or at least an OID that shows the number of entries in the NAT table 3. As an alternative to #2, perhaps a way to limit the number of MAC addresses allowed behind an SM 4. A text-based configuration file 5. A "do this timing" that lets us just set an AP to match some other AP as closely as possible by specifying the appropriate frame dimensions (or maybe just the other APs IP address (now that would be cool) TNX -- bp
