HA! I got one of those reversed jumper AP's and it cost me 2-3 extra tower climbs! I thought the jumpers on the KPP omni were reversed at first. Who do i send the bill to for the extra tower climbs this cost me?
Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Thu, Nov 13, 2014 at 12:41 PM, George Skorup (Cyber Broadcasting) via Af <af@afmug.com> wrote: > I guess I get to talk about this now. Some of the new A/B (minus FSK, > connector anyway) 5GHz APs were built with the internal jumpers reversed. > We put up some new sectors and noticed the beacon power was very weak.. > because it was on horizontal, not vertical! This is bad for 430 interop, > and obviously just as bad for 450 pre-13.2.. weak beacon, interference.. no > worky. > > So yeah, now the beacon is on both polarities. And if you have an AP with > reversed jumpers + 430 SMs, you'll have to use MIMO-A 430 interop mode > (which I believe is now the default) instead of SISO. Obviously with MIMO > you get 3dB less beacon power, and for 450 it doesn't matter, for 430 it > might depending on noise levels, etc. > > Shit happens. > > On 11/13/2014 10:12 AM, Bill Prince via Af wrote: > > Noticed this in the corrected list. Does this mean that the PMP450 is > polarity agnostic now in all frequencies (specifically 5 GHz)? > > PMP 450 AP 22943 CPY-9983, CPY-9631 > Fixed problem when AP/SM has crossed RF cables and would not register This > problem has been resolved in System Release 13.2. > > > bp > <part-15@SkylineBroadbandService> > > > On 11/13/2014 5:12 AM, Matt Mangriotis via Af wrote: > > It is here! > > > > We released 13.2 this morning officially. Come to our forum to discuss > anything about it. > > > > > http://community.cambiumnetworks.com/t5/PMP-450/System-Release-13-2-Now-Avaialable/m-p/36254/thread-id/278 > > > > Download the software from the usual place on our support site: > > > > https://support.cambiumnetworks.com/files/pmp450/ > > > > *Thanks* to all of you that Beta tested this software with us, and helped > to make it stronger and better than ever. Now that this is here, we’re > hard at work on delivering the next round of enhancements (code name 13.3 > (pretty original, huh?)) which are right around the corner. > > > > The momentum is building on the PMP 450 platform. > > > > Thanks again, > > > > Matt > > > > > > > >