Mexico
On 11/13/2014 12:40 PM, Kurt Fankhauser via Af wrote:
HA! I got one of those reversed jumper AP's and it cost me 2-3 extra
tower climbs! I thought the jumpers on the KPP omni were reversed at
first. Who do i send the bill to for the extra tower climbs this cost me?
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com <http://www.wavelinc.com/>
tel. 419-562-6405
fax. 419-617-0110
On Thu, Nov 13, 2014 at 12:41 PM, George Skorup (Cyber Broadcasting)
via Af <af@afmug.com <mailto:af@afmug.com>> wrote:
I guess I get to talk about this now. Some of the new A/B (minus
FSK, connector anyway) 5GHz APs were built with the internal
jumpers reversed. We put up some new sectors and noticed the
beacon power was very weak.. because it was on horizontal, not
vertical! This is bad for 430 interop, and obviously just as bad
for 450 pre-13.2.. weak beacon, interference.. no worky.
So yeah, now the beacon is on both polarities. And if you have an
AP with reversed jumpers + 430 SMs, you'll have to use MIMO-A 430
interop mode (which I believe is now the default) instead of SISO.
Obviously with MIMO you get 3dB less beacon power, and for 450 it
doesn't matter, for 430 it might depending on noise levels, etc.
Shit happens.
On 11/13/2014 10:12 AM, Bill Prince via Af wrote:
Noticed this in the corrected list. Does this mean that the
PMP450 is polarity agnostic now in all frequencies (specifically
5 GHz)?
PMP 450 AP 22943 CPY-9983, CPY-9631
Fixed problem when AP/SM has crossed RF cables and would not
register This problem has been resolved in System Release 13.2.
bp
<part-15@SkylineBroadbandService>
On 11/13/2014 5:12 AM, Matt Mangriotis via Af wrote:
It is here!
We released 13.2 this morning officially. Come to our forum to
discuss anything about it.
http://community.cambiumnetworks.com/t5/PMP-450/System-Release-13-2-Now-Avaialable/m-p/36254/thread-id/278
Download the software from the usual place on our support site:
https://support.cambiumnetworks.com/files/pmp450/
*Thanks*to all of you that Beta tested this software with us,
and helped to make it stronger and better than ever. Now that
this is here, we’re hard at work on delivering the next round of
enhancements (code name 13.3 (pretty original, huh?)) which are
right around the corner.
The momentum is building on the PMP 450 platform.
Thanks again,
Matt