Isn't that RX errors?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Nov 13, 2014 at 6:24 PM, Mark Radabaugh via Af <[email protected]> wrote: > We changed out a 430 5.7 90 degree sector AP this morning for a 450 5.7 > 90 sector this morning with 13.2 running on the 74 430 SM's on the > sector. With 74 SM's on a 430 you can probably guess why we changed it :-) > > ALL 430 SM's came back online cleanly, with very minimal downtime for the > customers. SM signal strengths look unchanged across the board. > > We did swap 5 of the highest usage customers to 450 SM's after the AP swap. > > I would not have expected as big of a difference in peak bandwidth usage > without swapping significantly more customers to 450 SM's than we did but: > > > > It looks like peak bandwidth went from just over 30Mb to just over 40Mbps > already. The TX errors are overrun which we start seeing as the AP nears > or reaches capacity. I expect that to go away as we swap out more SM's. > > In any case it appears it's very safe to change out a 430AP for a 450. > We have done this swap several times before with prior software versions > and have usually had to visit a handful of customers to get them back > online. This time we planned a little better (making sure 450 > compatibility was enabled on all of the SM's), all units had 13.2 on them, > and that the antenna was aimed with the same angle and downtilt. I > believe the new software made this a smoother process. > > Thanks Cambium! > > Mark > > > > -- > Mark Radabaugh > Amplex > [email protected] 419.837.5015 x 1021 > >
