The 2 ms is with or without sync on 2.4? 



----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



----- Original Message -----

From: "Sriram Chaturvedi via Af" <af@afmug.com> 
To: "Mathew Howard via Af" <af@afmug.com> 
Sent: Wednesday, November 19, 2014 8:03:13 PM 
Subject: Re: [AFMUG] ePMP Force 



Hi, 



Please allow me to clarify. 



The Force 110 uses the Connectorized UnSync'd unit with the two 10/100 FE 
ports. 



The Force 110 PTP uses the Connectorized GPS Sync'd unit with the single GigE 
port that supports 802.3af PoE in addition to proprietary PoE. GPS capabilities 
will be disabled (but the radio can still use the on board GPS chip to track 
satellites and provide coordinates). 



The 2ms latency is achieved purely through software changes in Release 2.4 and 
will apply to both products. 



There's more being discussed in this thread: 
http://community.cambiumnetworks.com/t5/ePMP-1000/ePmP-Force-110/m-p/35810#U35810
  

        
ePmP; Force 110 - Cambium Networks Community 
I'm looking at the specs for the Force 110 and I see it says the radio can 
achieve 150 Mbs of real data throughput. Then I see the ethernet connect... 
Read more... 



Thanks, 

Sriram 





From: Af <af-boun...@afmug.com> on behalf of Mathew Howard via Af 
<af@afmug.com> 
Sent: Wednesday, November 19, 2014 7:29 PM 
To: af@afmug.com 
Subject: Re: [AFMUG] ePMP Force 



Isn't the 2ms without sync? 




From: Af [af-boun...@afmug.com] on behalf of Josh Luthman via Af [af@afmug.com] 
Sent: Wednesday, November 19, 2014 7:04 PM 
To: af@afmug.com 
Subject: Re: [AFMUG] ePMP Force 




2ms check again 
http://www.cambiumnetworks.com/spec-sheets/epmp_force110_ptp_specs/epmp_force110_ptp_specs-2
 
Josh Luthman 
Office: 937-552-2340 
Direct: 937-552-2343 
1100 Wayne St 
Suite 1337 
Troy, OH 45373 
On Nov 19, 2014 7:59 PM, "Matt via Af" < af@afmug.com > wrote: 


> The ptp, yes. 

Oops, I forgot to include ePMP PTP Force 110 in my question. Anyone 
got there hands on them yet? Spec sheet says 17ms latency with GPS 
enabled in PTP. Was really hoping for less then that. 



>> > Exactly, the force110 based PTP does not include GPS sync 
>> > 
>> 
>> The Force 110 PTP PDF spec sheet states GPS sync. 
>> 
>> > 
>> > The same as any another SM? It's just a connectorized radio with 25db 
>> > dish. 
>> > 
>> 
>> >> Anyone got there hands on an ePMP Force yet? Curious on actual 
>> >> latency and throughput with GPS enabled. 



Reply via email to