A Fortigate will do that. you can even cobble it down to showing what user is logged in and what theyre doing
On Fri, Dec 26, 2014 at 11:34 AM, Ken Hohhof via Af <af@afmug.com> wrote: > You could put in one of the Mikrotik routers that have the LCD and lock > it to displaying the WAN side bandwidth graph. It won’t tell them what is > using all the bandwidth, but they can certainly go around shutting stuff > off to see what is causing the usage. Like oh, it went down when I shut > off the satellite TV receiver, I didn’t know that used the Internet. Or > look, it goes up whenever my daughter uses Facetime, that uses the > Internet? Or we all clicked to upgrade our iOS versions and the graph has > been pegged for the last day, meanwhile my Xbox games are lagging. > > *From:* Josh Luthman via Af <af@afmug.com> > *Sent:* Friday, December 26, 2014 11:29 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Customer - Detailed Usage Report > > > Powercode does bits down to the minute. > > If you want more detailed you'll probably need ntop or Procera. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 26, 2014 12:01 PM, "Wireless Admin via Af" <af@afmug.com> wrote: > >> Can anyone suggest a system that would allow an ISP to provide a >> customer a detailed report on Internet usage. I’m talking about the ability >> to show a customer, on usage based billing, what caused the consumption. >> My thought would be to route the customers IP through a specialized process >> for a limited period of time so details could be collected. A sort of >> debug mode. >> >> >> >> Steve B >> >> >> > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
