DOA maybe? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 23, 2015 1:43 PM, "Craig House" <cr...@totalhighspeed.net> wrote:
> Couldn't get it to stay connected long enough to run one tried running a > speed test a couple of times and it would vary anywhere from two mag to 30 > meg before it would drop > > Sent from my iPhone > > On Jan 23, 2015, at 12:41, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > Did you ever do a link test with epmp? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Jan 23, 2015 1:15 PM, "Craig House" <cr...@totalhighspeed.net> wrote: > >> Ok so I go to the tower today replace the Epmp AP with a Rocket M2 on >> the same antenna (Dual slant) and test with a Nano M2 at the same place I >> tested yesterday. I get -44 signal 95% Quality and 96% capacity and >> speedtests as pictured. What is the problem with the EPMP equipment. So >> far I am not impressed. IF the EPMP thinks the noise floor is -60 ish and >> a UBNT has no problem getting great thoughput I guess we will stick with >> the UBNT >> >> ------------------------------ >> *From: *"Craig House" <cr...@totalhighspeed.net> >> *To: *af@afmug.com >> *Sent: *Friday, January 23, 2015 6:25:52 AM >> *Subject: *Re: [AFMUG] Epmp newbee >> >> Ok so as an experiment I moved my 2.4 FSK omni to the same channel that >> this EPMP sector was on at the same height on the same tower. All 41 >> customers reconnected to the fsk omni and all link tests are in the upper >> 95% and better on all customers >> So why would this spectrum be so dirty for the 90 degree EPMP sector but >> usable and great link tests for the FSK omni at the same height.? >> >> ------------------------------ >> *From: *"Craig House" <cr...@totalhighspeed.net> >> *To: *af@afmug.com >> *Sent: *Thursday, January 22, 2015 8:24:27 PM >> *Subject: *Re: [AFMUG] Epmp newbee >> >> Cant use 5Ghz All my BH links are in 5ghz and I cant get though trees >> with 5ghz. 90% of my customer base is behind trees. This is not the tower >> I plan on leaving it on. But I dont understand why the noise floor would >> be that high here. It is 3 miles from any town and sits in the middle of >> nothing. Cow pastures all around. Unless the cows are carrying wireless >> routers?? >> >> ------------------------------ >> *From: *"John Woodfield" <john.woodfi...@jwcn.biz> >> *To: *af@afmug.com >> *Sent: *Thursday, January 22, 2015 8:12:39 PM >> *Subject: *Re: [AFMUG] Epmp newbee >> >> I would suggest 5ghz. Thats is stupid high for 2.4... >> >> John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) >> 708-1937 >> >> >> >> -----Original Message----- >> From: "Craig House" <cr...@totalhighspeed.net> >> Sent: Thursday, January 22, 2015 9:07pm >> To: "af@afmug.com" <af@afmug.com> >> Subject: Re: [AFMUG] Epmp newbee >> >> >> Yes I'm using a 90° sector and that AP is 180 feet up >> >> Sent from my iPhone >> >> On Jan 22, 2015, at 19:28, John Woodfield <john.woodfi...@jwcn.biz> >> wrote: >> >> That noise floor is horrible. I usually don't see it that bad even at >> 200' in the air. Are you using a sector? >> >> >> >> >> >> >> >> John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) >> 708-1937 >> >> >> >> -----Original Message----- >> From: "Craig House" <cr...@totalhighspeed.net> >> Sent: Thursday, January 22, 2015 7:59pm >> To: "af@afmug.com" <af@afmug.com> >> Subject: Re: [AFMUG] Epmp newbee >> >> >> Yes sorry. Capacity is bad. Quality is good >> >> Sent from my iPhone >> >> On Jan 22, 2015, at 18:57, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> Quality? >> On Jan 22, 2015 7:39 PM, "Craig House" <cr...@totalhighspeed.net> wrote: >> >>> Ok done. I have a -56 signal at the SM attached is a screenshot of the >>> analysis. -75 around the channel that I am on with the apj >>> So that is not the problem. Why would I have only 15% to 40% uplink >>> capacity when I have 95-100% capacity and a -56 signal >>> ------------------------------ >>> *From: *"Mike Hammett" <af...@ics-il.net> >>> *To: *af@afmug.com >>> *Sent: *Thursday, January 22, 2015 6:20:07 PM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> Have Java installed, run that program. Connect to that radio. >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions >>> http://www.ics-il.com >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> >>> ------------------------------ >>> *From: *"Craig House" <cr...@totalhighspeed.net> >>> *To: *af@afmug.com >>> *Sent: *Thursday, January 22, 2015 5:55:54 PM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec >>> analyzer tab and click download tool. How do I use it. It is a separate >>> utility that my laptop doesn't know how to use the file? >>> ------------------------------ >>> *From: *"Josh Luthman" <j...@imaginenetworksllc.com> >>> *To: *af@afmug.com >>> *Sent: *Thursday, January 22, 2015 5:39:34 PM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> >>> Monitor wireless might have a scan what you're after. I think that's >>> only compatible (ie TDD OR wifi not both) networks seen. >>> >>> Uplink issue, noise and all that basic rf stuff? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Jan 22, 2015 6:07 PM, "Craig House" <cr...@totalhighspeed.net> wrote: >>> >>>> I've been using cambium/Motorola FSK products now for 10 years but the >>>> EPMP product has a few things that I can't quite get to work >>>> The main one that concerns me is that I'm using an integrated SM and at >>>> any distance from the tower I can make it connect as long as I know the >>>> SSID. But what is the trick to making it show available SS IDs to connect >>>> to sort of like the scan available access points feature in ubiquity? >>>> >>>> The second question is that even a very close distances and was very >>>> good signals like -53 I have difficulty getting good uplink capacity the >>>> quality seems to be reasonable 90% or above but the capacity varies from >>>> 15% to 45% most of the time and it's obvious in the speed test that the >>>> uplink is not doing what it should >>>> What am I doing wrong photo is attached of what I'm talking about in >>>> the second question >>>> >>>> >>>> Sent from my iPhone >>> >>> >> >> >>
