Did you test it in a lab first?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jan 23, 2015 at 1:53 PM, Craig House <cr...@totalhighspeed.net> wrote: > Maybe but considering it's the first one I've purchased but doesn't make > me very excited about it > > Sent from my iPhone > > On Jan 23, 2015, at 12:46, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > DOA maybe? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Jan 23, 2015 1:43 PM, "Craig House" <cr...@totalhighspeed.net> wrote: > >> Couldn't get it to stay connected long enough to run one tried running a >> speed test a couple of times and it would vary anywhere from two mag to 30 >> meg before it would drop >> >> Sent from my iPhone >> >> On Jan 23, 2015, at 12:41, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> Did you ever do a link test with epmp? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Jan 23, 2015 1:15 PM, "Craig House" <cr...@totalhighspeed.net> wrote: >> >>> Ok so I go to the tower today replace the Epmp AP with a Rocket M2 on >>> the same antenna (Dual slant) and test with a Nano M2 at the same place I >>> tested yesterday. I get -44 signal 95% Quality and 96% capacity and >>> speedtests as pictured. What is the problem with the EPMP equipment. So >>> far I am not impressed. IF the EPMP thinks the noise floor is -60 ish and >>> a UBNT has no problem getting great thoughput I guess we will stick with >>> the UBNT >>> >>> ------------------------------ >>> *From: *"Craig House" <cr...@totalhighspeed.net> >>> *To: *af@afmug.com >>> *Sent: *Friday, January 23, 2015 6:25:52 AM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> >>> Ok so as an experiment I moved my 2.4 FSK omni to the same channel that >>> this EPMP sector was on at the same height on the same tower. All 41 >>> customers reconnected to the fsk omni and all link tests are in the upper >>> 95% and better on all customers >>> So why would this spectrum be so dirty for the 90 degree EPMP sector but >>> usable and great link tests for the FSK omni at the same height.? >>> >>> ------------------------------ >>> *From: *"Craig House" <cr...@totalhighspeed.net> >>> *To: *af@afmug.com >>> *Sent: *Thursday, January 22, 2015 8:24:27 PM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> >>> Cant use 5Ghz All my BH links are in 5ghz and I cant get though trees >>> with 5ghz. 90% of my customer base is behind trees. This is not the tower >>> I plan on leaving it on. But I dont understand why the noise floor would >>> be that high here. It is 3 miles from any town and sits in the middle of >>> nothing. Cow pastures all around. Unless the cows are carrying wireless >>> routers?? >>> >>> ------------------------------ >>> *From: *"John Woodfield" <john.woodfi...@jwcn.biz> >>> *To: *af@afmug.com >>> *Sent: *Thursday, January 22, 2015 8:12:39 PM >>> *Subject: *Re: [AFMUG] Epmp newbee >>> >>> I would suggest 5ghz. Thats is stupid high for 2.4... >>> >>> John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) >>> 708-1937 >>> >>> >>> >>> -----Original Message----- >>> From: "Craig House" <cr...@totalhighspeed.net> >>> Sent: Thursday, January 22, 2015 9:07pm >>> To: "af@afmug.com" <af@afmug.com> >>> Subject: Re: [AFMUG] Epmp newbee >>> >>> >>> Yes I'm using a 90° sector and that AP is 180 feet up >>> >>> Sent from my iPhone >>> >>> On Jan 22, 2015, at 19:28, John Woodfield <john.woodfi...@jwcn.biz> >>> wrote: >>> >>> That noise floor is horrible. I usually don't see it that bad even at >>> 200' in the air. Are you using a sector? >>> >>> >>> >>> >>> >>> >>> >>> John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) >>> 708-1937 >>> >>> >>> >>> -----Original Message----- >>> From: "Craig House" <cr...@totalhighspeed.net> >>> Sent: Thursday, January 22, 2015 7:59pm >>> To: "af@afmug.com" <af@afmug.com> >>> Subject: Re: [AFMUG] Epmp newbee >>> >>> >>> Yes sorry. Capacity is bad. Quality is good >>> >>> Sent from my iPhone >>> >>> On Jan 22, 2015, at 18:57, Josh Luthman <j...@imaginenetworksllc.com> >>> wrote: >>> >>> Quality? >>> On Jan 22, 2015 7:39 PM, "Craig House" <cr...@totalhighspeed.net> wrote: >>> >>>> Ok done. I have a -56 signal at the SM attached is a screenshot of >>>> the analysis. -75 around the channel that I am on with the apj >>>> So that is not the problem. Why would I have only 15% to 40% uplink >>>> capacity when I have 95-100% capacity and a -56 signal >>>> ------------------------------ >>>> *From: *"Mike Hammett" <af...@ics-il.net> >>>> *To: *af@afmug.com >>>> *Sent: *Thursday, January 22, 2015 6:20:07 PM >>>> *Subject: *Re: [AFMUG] Epmp newbee >>>> Have Java installed, run that program. Connect to that radio. >>>> >>>> ----- >>>> Mike Hammett >>>> Intelligent Computing Solutions >>>> http://www.ics-il.com >>>> <https://www.facebook.com/ICSIL> >>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>>> <https://twitter.com/ICSIL> >>>> >>>> ------------------------------ >>>> *From: *"Craig House" <cr...@totalhighspeed.net> >>>> *To: *af@afmug.com >>>> *Sent: *Thursday, January 22, 2015 5:55:54 PM >>>> *Subject: *Re: [AFMUG] Epmp newbee >>>> So I switch the AP to Spectrum analyzer mode and reboot. Got to the >>>> spec analyzer tab and click download tool. How do I use it. It is a >>>> separate utility that my laptop doesn't know how to use the file? >>>> ------------------------------ >>>> *From: *"Josh Luthman" <j...@imaginenetworksllc.com> >>>> *To: *af@afmug.com >>>> *Sent: *Thursday, January 22, 2015 5:39:34 PM >>>> *Subject: *Re: [AFMUG] Epmp newbee >>>> >>>> Monitor wireless might have a scan what you're after. I think that's >>>> only compatible (ie TDD OR wifi not both) networks seen. >>>> >>>> Uplink issue, noise and all that basic rf stuff? >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Jan 22, 2015 6:07 PM, "Craig House" <cr...@totalhighspeed.net> >>>> wrote: >>>> >>>>> I've been using cambium/Motorola FSK products now for 10 years but the >>>>> EPMP product has a few things that I can't quite get to work >>>>> The main one that concerns me is that I'm using an integrated SM and >>>>> at any distance from the tower I can make it connect as long as I know the >>>>> SSID. But what is the trick to making it show available SS IDs to connect >>>>> to sort of like the scan available access points feature in ubiquity? >>>>> >>>>> The second question is that even a very close distances and was very >>>>> good signals like -53 I have difficulty getting good uplink capacity the >>>>> quality seems to be reasonable 90% or above but the capacity varies from >>>>> 15% to 45% most of the time and it's obvious in the speed test that the >>>>> uplink is not doing what it should >>>>> What am I doing wrong photo is attached of what I'm talking about in >>>>> the second question >>>>> >>>>> >>>>> Sent from my iPhone >>>> >>>> >>> >>> >>>
