Yeah, that is what I was told at Animal Farm also. It seems like doing something specific or something in the wrong order makes them not work. Next time I guess I'll have to follow directions, LOL.
On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser <li...@wavelinc.com> wrote: > Jeremy, > > I ended up having to default the units and then follow the quick start > guide to the T. There must be some bugs to work out in the firmware cause > when I ordered them the guy told me to follow the quick start to the T. > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <jeremysmi...@gmail.com> wrote: > >> I also didn't follow the guide the first time. On subsequent attempts I >> did, but it seemed like something was wrong with them at that point. >> Anyway, it's nice to see someone having some success. The platform looks >> like it has a lot of potential. >> >> On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <li...@wavelinc.com> >> wrote: >> >>> Jeremy, >>> >>> Yes I had issues but I didn't call support. It took me almost 2 hours to >>> get the two radios to see each other but I finally got them too. I wasn't >>> following the PTP quick start guide like I was told to. When I initially >>> configured the radios I disabled the 2nd port (called WAN) in the manual. >>> For some reason they would not link until I turned it back on. Even though >>> I wasn't using the WAN port. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <jeremysmi...@gmail.com> wrote: >>> >>>> I had some issues with the configuration and couldn't ever get them to >>>> pass traffic. Did you run into any issues that required support? >>>> >>>> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <r...@triadwireless.net> >>>> wrote: >>>> >>>>> I saw that too when I was reviewing the brochure this morning. I was >>>>> just assuming they were considering this a long range product. Kurt, do >>>>> you mind telling me what those radios cost? >>>>> >>>>> >>>>> >>>>> Rory >>>>> >>>>> >>>>> >>>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Kurt >>>>> Fankhauser >>>>> *Sent:* Friday, February 13, 2015 7:36 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>>>> >>>>> >>>>> >>>>> Just got done testing a Trango Altum AC PTP link on the bench. Units >>>>> are 25db integrated panels. Did a 40mhz channel test and 80mhz via UDP. I >>>>> tried a TCP test between two RB2011's and best I seen was 175-180'ish >>>>> and that was with both 40 and 80mhz channels. CPU seemed to be maxing out >>>>> on the 2011's. >>>>> >>>>> >>>>> >>>>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS >>>>> bands but it doesn't :( >>>>> >>>>> >>>>> >>>>> Kurt Fankhauser >>>>> >>>>> Wavelinc Communications >>>>> >>>>> P.O. Box 126 >>>>> >>>>> Bucyrus, OH 44820 >>>>> >>>>> http://www.wavelinc.com >>>>> >>>>> tel. 419-562-6405 >>>>> >>>>> fax. 419-617-0110 >>>>> >>>> >>>> >>> >> >