I was hoping to replace a Ligowave link I have that's running on 40mhz. I don't feel like burning up a whole 80mhz of spectrum through, so I think I'll be buying a PTP-650 especially since I need DFS freq's.
Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Feb 13, 2015 at 10:19 PM, Jeremy <jeremysmi...@gmail.com> wrote: > I see that they sell them on the 'Trango store' now too. Pretty sweet. > > On Fri, Feb 13, 2015 at 8:17 PM, Jeremy <jeremysmi...@gmail.com> wrote: > >> Yeah, that is what I was told at Animal Farm also. It seems like doing >> something specific or something in the wrong order makes them not work. >> Next time I guess I'll have to follow directions, LOL. >> >> On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser <li...@wavelinc.com> >> wrote: >> >>> Jeremy, >>> >>> I ended up having to default the units and then follow the quick start >>> guide to the T. There must be some bugs to work out in the firmware cause >>> when I ordered them the guy told me to follow the quick start to the T. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <jeremysmi...@gmail.com> wrote: >>> >>>> I also didn't follow the guide the first time. On subsequent attempts >>>> I did, but it seemed like something was wrong with them at that point. >>>> Anyway, it's nice to see someone having some success. The platform looks >>>> like it has a lot of potential. >>>> >>>> On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <li...@wavelinc.com> >>>> wrote: >>>> >>>>> Jeremy, >>>>> >>>>> Yes I had issues but I didn't call support. It took me almost 2 hours >>>>> to get the two radios to see each other but I finally got them too. I >>>>> wasn't following the PTP quick start guide like I was told to. When I >>>>> initially configured the radios I disabled the 2nd port (called WAN) in >>>>> the >>>>> manual. For some reason they would not link until I turned it back on. >>>>> Even >>>>> though I wasn't using the WAN port. >>>>> >>>>> >>>>> Kurt Fankhauser >>>>> >>>>> Wavelinc Communications >>>>> >>>>> P.O. Box 126 >>>>> >>>>> Bucyrus, OH 44820 >>>>> >>>>> http://www.wavelinc.com >>>>> >>>>> tel. 419-562-6405 >>>>> >>>>> fax. 419-617-0110 >>>>> >>>>> On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <jeremysmi...@gmail.com> >>>>> wrote: >>>>> >>>>>> I had some issues with the configuration and couldn't ever get them >>>>>> to pass traffic. Did you run into any issues that required support? >>>>>> >>>>>> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <r...@triadwireless.net >>>>>> > wrote: >>>>>> >>>>>>> I saw that too when I was reviewing the brochure this morning. I >>>>>>> was just assuming they were considering this a long range product. >>>>>>> Kurt, >>>>>>> do you mind telling me what those radios cost? >>>>>>> >>>>>>> >>>>>>> >>>>>>> Rory >>>>>>> >>>>>>> >>>>>>> >>>>>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Kurt >>>>>>> Fankhauser >>>>>>> *Sent:* Friday, February 13, 2015 7:36 PM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>>>>>> >>>>>>> >>>>>>> >>>>>>> Just got done testing a Trango Altum AC PTP link on the bench. Units >>>>>>> are 25db integrated panels. Did a 40mhz channel test and 80mhz via UDP. >>>>>>> I >>>>>>> tried a TCP test between two RB2011's and best I seen was 175-180'ish >>>>>>> and that was with both 40 and 80mhz channels. CPU seemed to be maxing >>>>>>> out >>>>>>> on the 2011's. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS >>>>>>> bands but it doesn't :( >>>>>>> >>>>>>> >>>>>>> >>>>>>> Kurt Fankhauser >>>>>>> >>>>>>> Wavelinc Communications >>>>>>> >>>>>>> P.O. Box 126 >>>>>>> >>>>>>> Bucyrus, OH 44820 >>>>>>> >>>>>>> http://www.wavelinc.com >>>>>>> >>>>>>> tel. 419-562-6405 >>>>>>> >>>>>>> fax. 419-617-0110 >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >