I see that they sell them on the 'Trango store' now too. Pretty sweet. On Fri, Feb 13, 2015 at 8:17 PM, Jeremy <jeremysmi...@gmail.com> wrote:
> Yeah, that is what I was told at Animal Farm also. It seems like doing > something specific or something in the wrong order makes them not work. > Next time I guess I'll have to follow directions, LOL. > > On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser <li...@wavelinc.com> > wrote: > >> Jeremy, >> >> I ended up having to default the units and then follow the quick start >> guide to the T. There must be some bugs to work out in the firmware cause >> when I ordered them the guy told me to follow the quick start to the T. >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <jeremysmi...@gmail.com> wrote: >> >>> I also didn't follow the guide the first time. On subsequent attempts I >>> did, but it seemed like something was wrong with them at that point. >>> Anyway, it's nice to see someone having some success. The platform looks >>> like it has a lot of potential. >>> >>> On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <li...@wavelinc.com> >>> wrote: >>> >>>> Jeremy, >>>> >>>> Yes I had issues but I didn't call support. It took me almost 2 hours >>>> to get the two radios to see each other but I finally got them too. I >>>> wasn't following the PTP quick start guide like I was told to. When I >>>> initially configured the radios I disabled the 2nd port (called WAN) in the >>>> manual. For some reason they would not link until I turned it back on. Even >>>> though I wasn't using the WAN port. >>>> >>>> >>>> Kurt Fankhauser >>>> >>>> Wavelinc Communications >>>> >>>> P.O. Box 126 >>>> >>>> Bucyrus, OH 44820 >>>> >>>> http://www.wavelinc.com >>>> >>>> tel. 419-562-6405 >>>> >>>> fax. 419-617-0110 >>>> >>>> On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <jeremysmi...@gmail.com> wrote: >>>> >>>>> I had some issues with the configuration and couldn't ever get them to >>>>> pass traffic. Did you run into any issues that required support? >>>>> >>>>> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <r...@triadwireless.net> >>>>> wrote: >>>>> >>>>>> I saw that too when I was reviewing the brochure this morning. I >>>>>> was just assuming they were considering this a long range product. Kurt, >>>>>> do you mind telling me what those radios cost? >>>>>> >>>>>> >>>>>> >>>>>> Rory >>>>>> >>>>>> >>>>>> >>>>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Kurt >>>>>> Fankhauser >>>>>> *Sent:* Friday, February 13, 2015 7:36 PM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>>>>> >>>>>> >>>>>> >>>>>> Just got done testing a Trango Altum AC PTP link on the bench. Units >>>>>> are 25db integrated panels. Did a 40mhz channel test and 80mhz via UDP. I >>>>>> tried a TCP test between two RB2011's and best I seen was 175-180'ish >>>>>> and that was with both 40 and 80mhz channels. CPU seemed to be maxing out >>>>>> on the 2011's. >>>>>> >>>>>> >>>>>> >>>>>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS >>>>>> bands but it doesn't :( >>>>>> >>>>>> >>>>>> >>>>>> Kurt Fankhauser >>>>>> >>>>>> Wavelinc Communications >>>>>> >>>>>> P.O. Box 126 >>>>>> >>>>>> Bucyrus, OH 44820 >>>>>> >>>>>> http://www.wavelinc.com >>>>>> >>>>>> tel. 419-562-6405 >>>>>> >>>>>> fax. 419-617-0110 >>>>>> >>>>> >>>>> >>>> >>> >> >