Absolutely. It will not work without it. On Wed, May 13, 2015 at 6:56 PM, Andreas Wiatowski <andr...@silowireless.com > wrote:
> Out of curiosity…should I be turning on GPS timing? Does it even work? > -- > > > From: Josh Reynolds > Reply-To: "af@afmug.com" > Date: Wednesday, May 13, 2015 at 8:49 PM > To: "af@afmug.com" > Subject: Re: [AFMUG] Airfiber 24 weird issue > > Make both airfibers on the shared rooftop masters, with reversed tx/rx. > I think the most we have at one location is 4, and there is no more than 10 > feet from end to end of the structure. They are on slightly different > azimuths. > > Josh Reynolds > CIO, SPITwSPOTSwww.spitwspots.com > > On 05/13/2015 04:46 PM, Andreas Wiatowski wrote: > > We have 2 Airfiber 24’s co-located on a building rooftop… they have about > 15ft horizontal separation. The one air fibre pair is aimed at a tower > about 1KM away and not the tower side we are about 75ft in the air. The > other Airfiber is located on a building across the road at the same > height. The azimuth is about 15 degrees off of each other. The link from > roof to tower, works 100%. The link from building to building is about > 400ft away and we are having weird issues getting it to link. Is there > some sort of co-location magic to make this work? I read somewhere that we > should have master or slave mode matching at the co-located sites. > > Any words of wisdom are appreciated. > > -Andreas > > -- > > >
