What version of firmware? I had issues with SPF talking to other SFP's and vlan issues over SFP until I upgraded, but that was almost a year and a half ago.
On Thu, Jul 16, 2015 at 12:24 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > I really think it's just the SFP+ ports that have the issue. I was able to > get it working on an eth port before it was defaulted, but could never get > the SFPs talking. Tried several different SFPs (makes and types). After the > default we couldn't even get it to work on eth anymore, so it's got to be a > configure issue somewhere. > > It will show transmit happening at about 320kbps, but 0 receive. > > Thank you, > Brett A Mansfield. > > > On Jul 16, 2015, at 9:31 AM, Butch Evans <but...@butchevans.com> wrote: > > > >> On Thu, 2015-07-16 at 15:16 +0000, Sterling Jacobson wrote: > >> I've got a CCR that I've reset back to no config and programmed it > >> via MAC access on winbox. > >> > >> It can't seem to ping out. > >> > >> It shows up on the neighborhood view for the remote mikrotik, so I > >> know it's talking layer2. > >> > >> Just can't seem to talk layer3. > >> > >> Seems like I've seen this before, but can't remember what the problem > >> was. > > > > Maybe check to ensure you have the proper netmask on your address entry > > for the router. Also, ensure you have a proper default gateway. > > > > > > > > -- > > Butch Evans > > Training and Support for WISPs > > 702-537-0979 > > http://store.wispgear.net/ > > http://www.butchevans.com/ > >
