Oh, did that just come out? I checked within the last two weeks and 6.29.1 showed as the latest.
Sent from my iPhone > On Jul 16, 2015, at 2:09 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > > It's 6.30.1 actually > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > >> On Thu, Jul 16, 2015 at 4:00 PM, Brett A Mansfield >> <li...@silverlakeinternet.com> wrote: >> It's the latest software version 6.29.1. The firmware I'll have to double >> check on. I think it's 3.x Something. >> >> Sent from my iPhone >> >>> On Jul 16, 2015, at 1:54 PM, Cameron Crum <cc...@wispmon.com> wrote: >>> >>> What version of firmware? I had issues with SPF talking to other SFP's and >>> vlan issues over SFP until I upgraded, but that was almost a year and a >>> half ago. >>> >>>> On Thu, Jul 16, 2015 at 12:24 PM, Brett A Mansfield >>>> <li...@silverlakeinternet.com> wrote: >>>> I really think it's just the SFP+ ports that have the issue. I was able to >>>> get it working on an eth port before it was defaulted, but could never get >>>> the SFPs talking. Tried several different SFPs (makes and types). After >>>> the default we couldn't even get it to work on eth anymore, so it's got to >>>> be a configure issue somewhere. >>>> >>>> It will show transmit happening at about 320kbps, but 0 receive. >>>> >>>> Thank you, >>>> Brett A Mansfield. >>>> >>>> > On Jul 16, 2015, at 9:31 AM, Butch Evans <but...@butchevans.com> wrote: >>>> > >>>> >> On Thu, 2015-07-16 at 15:16 +0000, Sterling Jacobson wrote: >>>> >> I've got a CCR that I've reset back to no config and programmed it >>>> >> via MAC access on winbox. >>>> >> >>>> >> It can't seem to ping out. >>>> >> >>>> >> It shows up on the neighborhood view for the remote mikrotik, so I >>>> >> know it's talking layer2. >>>> >> >>>> >> Just can't seem to talk layer3. >>>> >> >>>> >> Seems like I've seen this before, but can't remember what the problem >>>> >> was. >>>> > >>>> > Maybe check to ensure you have the proper netmask on your address entry >>>> > for the router. Also, ensure you have a proper default gateway. >>>> > >>>> > >>>> > >>>> > -- >>>> > Butch Evans >>>> > Training and Support for WISPs >>>> > 702-537-0979 >>>> > http://store.wispgear.net/ >>>> > http://www.butchevans.com/ >
