It's 6.30.1 actually
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jul 16, 2015 at 4:00 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > It's the latest software version 6.29.1. The firmware I'll have to double > check on. I think it's 3.x Something. > > Sent from my iPhone > > On Jul 16, 2015, at 1:54 PM, Cameron Crum <cc...@wispmon.com> wrote: > > What version of firmware? I had issues with SPF talking to other SFP's and > vlan issues over SFP until I upgraded, but that was almost a year and a > half ago. > > On Thu, Jul 16, 2015 at 12:24 PM, Brett A Mansfield < > li...@silverlakeinternet.com> wrote: > >> I really think it's just the SFP+ ports that have the issue. I was able >> to get it working on an eth port before it was defaulted, but could never >> get the SFPs talking. Tried several different SFPs (makes and types). After >> the default we couldn't even get it to work on eth anymore, so it's got to >> be a configure issue somewhere. >> >> It will show transmit happening at about 320kbps, but 0 receive. >> >> Thank you, >> Brett A Mansfield. >> >> > On Jul 16, 2015, at 9:31 AM, Butch Evans <but...@butchevans.com> wrote: >> > >> >> On Thu, 2015-07-16 at 15:16 +0000, Sterling Jacobson wrote: >> >> I've got a CCR that I've reset back to no config and programmed it >> >> via MAC access on winbox. >> >> >> >> It can't seem to ping out. >> >> >> >> It shows up on the neighborhood view for the remote mikrotik, so I >> >> know it's talking layer2. >> >> >> >> Just can't seem to talk layer3. >> >> >> >> Seems like I've seen this before, but can't remember what the problem >> >> was. >> > >> > Maybe check to ensure you have the proper netmask on your address entry >> > for the router. Also, ensure you have a proper default gateway. >> > >> > >> > >> > -- >> > Butch Evans >> > Training and Support for WISPs >> > 702-537-0979 >> > http://store.wispgear.net/ >> > http://www.butchevans.com/ >> >> >
