Yesterday (July 15) As noted in the announcement thread, this is a bug fix. It also added some bugs *eyeroll*
http://forum.mikrotik.com/viewtopic.php?f=21&t=98580 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jul 16, 2015 at 4:12 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > Oh, did that just come out? I checked within the last two weeks and 6.29.1 > showed as the latest. > > Sent from my iPhone > > On Jul 16, 2015, at 2:09 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > It's 6.30.1 actually > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Jul 16, 2015 at 4:00 PM, Brett A Mansfield < > li...@silverlakeinternet.com> wrote: > >> It's the latest software version 6.29.1. The firmware I'll have to double >> check on. I think it's 3.x Something. >> >> Sent from my iPhone >> >> On Jul 16, 2015, at 1:54 PM, Cameron Crum <cc...@wispmon.com> wrote: >> >> What version of firmware? I had issues with SPF talking to other SFP's >> and vlan issues over SFP until I upgraded, but that was almost a year and a >> half ago. >> >> On Thu, Jul 16, 2015 at 12:24 PM, Brett A Mansfield < >> li...@silverlakeinternet.com> wrote: >> >>> I really think it's just the SFP+ ports that have the issue. I was able >>> to get it working on an eth port before it was defaulted, but could never >>> get the SFPs talking. Tried several different SFPs (makes and types). After >>> the default we couldn't even get it to work on eth anymore, so it's got to >>> be a configure issue somewhere. >>> >>> It will show transmit happening at about 320kbps, but 0 receive. >>> >>> Thank you, >>> Brett A Mansfield. >>> >>> > On Jul 16, 2015, at 9:31 AM, Butch Evans <but...@butchevans.com> >>> wrote: >>> > >>> >> On Thu, 2015-07-16 at 15:16 +0000, Sterling Jacobson wrote: >>> >> I've got a CCR that I've reset back to no config and programmed it >>> >> via MAC access on winbox. >>> >> >>> >> It can't seem to ping out. >>> >> >>> >> It shows up on the neighborhood view for the remote mikrotik, so I >>> >> know it's talking layer2. >>> >> >>> >> Just can't seem to talk layer3. >>> >> >>> >> Seems like I've seen this before, but can't remember what the problem >>> >> was. >>> > >>> > Maybe check to ensure you have the proper netmask on your address entry >>> > for the router. Also, ensure you have a proper default gateway. >>> > >>> > >>> > >>> > -- >>> > Butch Evans >>> > Training and Support for WISPs >>> > 702-537-0979 >>> > http://store.wispgear.net/ >>> > http://www.butchevans.com/ >>> >>> >> >
