No, it is flat fee. Some may not be able to be repaired (lighting, etc...). I believe cost is $400, but you can confirm with support. There may be others out there that will do for less (for smaller repairs), so you could definitely look around.
Thanks, Ben On Thu, Aug 13, 2015 at 4:30 PM, Nate Burke <n...@blastcomm.com> wrote: > So is the pricing dependent on what is wrong? Like a bad RJ45 port with > no other issues would be less than say the RF is Fried, or took a > lightening strike? > > > On 8/13/2015 5:26 PM, Ben Moore wrote: > > I would contact support to get details, but basically you are not getting > back your same unit. You get a refurbished unit and then your unit is > repaired and put back in refurbished stock (there may be more to it than > this...but this is basics ;)). > > On Thu, Aug 13, 2015 at 4:16 PM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> So you decided to do it! Can you share the price publicly or is it a >> case by case basis? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Thu, Aug 13, 2015 at 6:08 PM, Ben Moore <ben.mo...@ubnt.com> wrote: >> >>> Nice Josh...We actually did more than think about it... >>> >>> Hi Nate - >>> >>> Go ahead and contact support and they will get you details on getting >>> refurbished unit going. >>> >>> Thanks, >>> Ben >>> >>> On Thu, Aug 13, 2015 at 4:03 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>>> Ubnt thought about doing it... >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Aug 13, 2015 6:01 PM, "Nate Burke" <n...@blastcomm.com> wrote: >>>> >>>>> Anybody doing AF24 Repairs? I have an AF24 where an RJ45 didn't get >>>>> crimped right and buggered up the jack on the radio. It seems like on a >>>>> $1500 radio, this would be worth repairing. Anybody doing these? The >>>>> radio was working fine until the bad crimp was plugged in, now it won't >>>>> make good contact with the pins anymore. >>>>> >>>>> Nate >>>>> >>>> >>> >> > >
