O.o can I buy refurbs without a new one? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 13, 2015 6:36 PM, "Ben Moore" <ben.mo...@ubnt.com> wrote:
> No, it is flat fee. Some may not be able to be repaired (lighting, > etc...). I believe cost is $400, but you can confirm with support. There > may be others out there that will do for less (for smaller repairs), so you > could definitely look around. > > Thanks, > Ben > > On Thu, Aug 13, 2015 at 4:30 PM, Nate Burke <n...@blastcomm.com> wrote: > >> So is the pricing dependent on what is wrong? Like a bad RJ45 port with >> no other issues would be less than say the RF is Fried, or took a >> lightening strike? >> >> >> On 8/13/2015 5:26 PM, Ben Moore wrote: >> >> I would contact support to get details, but basically you are not getting >> back your same unit. You get a refurbished unit and then your unit is >> repaired and put back in refurbished stock (there may be more to it than >> this...but this is basics ;)). >> >> On Thu, Aug 13, 2015 at 4:16 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> So you decided to do it! Can you share the price publicly or is it a >>> case by case basis? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Aug 13, 2015 at 6:08 PM, Ben Moore <ben.mo...@ubnt.com> wrote: >>> >>>> Nice Josh...We actually did more than think about it... >>>> >>>> Hi Nate - >>>> >>>> Go ahead and contact support and they will get you details on getting >>>> refurbished unit going. >>>> >>>> Thanks, >>>> Ben >>>> >>>> On Thu, Aug 13, 2015 at 4:03 PM, Josh Luthman < >>>> j...@imaginenetworksllc.com> wrote: >>>> >>>>> Ubnt thought about doing it... >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> On Aug 13, 2015 6:01 PM, "Nate Burke" <n...@blastcomm.com> wrote: >>>>> >>>>>> Anybody doing AF24 Repairs? I have an AF24 where an RJ45 didn't get >>>>>> crimped right and buggered up the jack on the radio. It seems like on a >>>>>> $1500 radio, this would be worth repairing. Anybody doing these? The >>>>>> radio was working fine until the bad crimp was plugged in, now it won't >>>>>> make good contact with the pins anymore. >>>>>> >>>>>> Nate >>>>>> >>>>> >>>> >>> >> >> >
