+1 Same here. About 20 AP's and 300 SM's all on 13.4. No issues.
On Fri, Sep 4, 2015 at 11:57 AM, Bill Prince <part15...@gmail.com> wrote:
> FWIW, we have 13.4 on everything now; FSK, PMP430, and PMP450. We're not
> seeing the watchdog resets.
>
> bp
> <part15sbs{at}gmail{dot}com>
>
>
> On 9/4/2015 9:55 AM, Sam Lambie wrote:
>
> Damn that sucks about it not being a fix. I too read the release notes too
> fast. FWIW, installing 13.4 has made for a bit more stable network on our
> 450's.
>
>
> On Fri, Sep 4, 2015 at 10:44 AM, Brian Sullivan <installe...@foxvalley.net
> > wrote:
>
>> I probably read the Release Notes too fast and assumed that it was a
>> fix. I just re-read them and I only see what you do. So it appears that
>> there was no 'bug fix' for this issue. In the Cambium forum, Matt M noted
>> that there may be a Maintenance release to address this. He did not state
>> an ETA. I would assume that us submitting support tickets <shudder> would
>> help them get closer to squashing the bug.
>>
>> On 9/4/2015 10:57 AM, Ken Hohhof wrote:
>>
>>> Brian, is it your understanding that 13.4 was supposed to cure or help
>>> the watchdog resets? I don't see anything in the release notes other than
>>> the log entry for user initiated resets.
>>>
>>> I wish I could detect a pattern or cause-effect relationship which APs
>>> exhibit this and which rarely or never do.
>>>
>>>
>>> -----Original Message----- From: Brian Sullivan
>>> Sent: Friday, September 04, 2015 10:47 AM
>>> To: af@afmug.com
>>> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset
>>>
>>> For us, we rolled back the affected AP's to 13.2 and they are back to
>>> their normal routine (once in a while reboots). I replaced one of them
>>> and brought back here to test. I'll know more after we collect graph
>>> data and submit a ticket with Cambium.
>>>
>>> On 9/4/2015 9:05 AM, Ken Hohhof wrote:
>>>
>>>> So what's the current status on this? Is it better to upgrade to 13.4,
>>>> or stay on 13.2? And do you have to upgrade both APs and SMs?
>>>>
>>>> And was 13.4 supposed to fix a watchdog reset problem? Or just create
>>>> a different event log entry for user initiated reboots?
>>>>
>>>> Watchdog resets are a big problem, it used to be just gamers and VoIP
>>>> users, but now everyone bitches if their video stream buffers. Or their
>>>> smartphone switches to using mobile data, or their webcam has gaps. And
>>>> it's worse with DFS or LBT.
>>>>
>>>>
>>>> -----Original Message----- From: Mark Radabaugh
>>>> Sent: Friday, August 28, 2015 9:54 PM
>>>> To: af@afmug.com
>>>> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset
>>>>
>>>> We have been seeing this across 200+ AP's
>>>>
>>>> It's getting truly annoying. Cambium tech support has helpful
>>>> suggestions like'just put them in free run'. Um.... Thanks for the help,
>>>> but no.
>>>>
>>>> Mark Radabaugh
>>>> Amplex
>>>> 27800 Lemoyne, Ste F
>>>> Millbury, OH 43447
>>>> 419-261-5996
>>>>
>>>> On Aug 28, 2015, at 4:56 PM, Brian Sullivan <
>>>>> <installe...@foxvalley.net>installe...@foxvalley.net> wrote:
>>>>>
>>>>> Last week we rolled out 13.4 to 450 AP's after testing in-house for a
>>>>> while. While running 13.2 we would see an AP here or there reboot on
>>>>> occasion by itself. The only message in the Event Log mentions Watchdog
>>>>> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4
>>>>> release notes.
>>>>>
>>>>> Since we upgraded the network to 13.4 we are now seeing at least 4
>>>>> AP's out there rebooting several times per day. On one of these AP's we
>>>>> are also seeing SM's (all 17 registered) reboot along with the AP. The
>>>>> site has UPS backup so I know it's not a power grid problem. I am
>>>>> planning
>>>>> to roll the affected AP's back to 13.2 this evening.
>>>>>
>>>>> Anyone else having Watchdog issues with the 13.4 release?
>>>>>
>>>>> ******System Startup******
>>>>> System Reset Exception -- Watchdog Reset
>>>>> Software Version : CANOPY 13.4 AP-DES
>>>>> Board Type : P12
>>>>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 -
>>>>> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms
>>>>> FPGA Version : 040715
>>>>> FPGA Features : DES, Sched, US/ETSI;
>>>>> 08/28/2015 : 14:11:42 CST : :Time Set
>>>>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port.
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
> --
> --
> *Sam Lambie*
> Taosnet Wireless Tech.
> 575-758-7598 Office
> www.Taosnet.com <http://www.newmex.com>
>
>
>
