Damn that sucks about it not being a fix. I too read the release notes too fast. FWIW, installing 13.4 has made for a bit more stable network on our 450's.
On Fri, Sep 4, 2015 at 10:44 AM, Brian Sullivan <installe...@foxvalley.net> wrote: > I probably read the Release Notes too fast and assumed that it was a fix. > I just re-read them and I only see what you do. So it appears that there > was no 'bug fix' for this issue. In the Cambium forum, Matt M noted that > there may be a Maintenance release to address this. He did not state an > ETA. I would assume that us submitting support tickets <shudder> would > help them get closer to squashing the bug. > > On 9/4/2015 10:57 AM, Ken Hohhof wrote: > >> Brian, is it your understanding that 13.4 was supposed to cure or help >> the watchdog resets? I don't see anything in the release notes other than >> the log entry for user initiated resets. >> >> I wish I could detect a pattern or cause-effect relationship which APs >> exhibit this and which rarely or never do. >> >> >> -----Original Message----- From: Brian Sullivan >> Sent: Friday, September 04, 2015 10:47 AM >> To: af@afmug.com >> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset >> >> For us, we rolled back the affected AP's to 13.2 and they are back to >> their normal routine (once in a while reboots). I replaced one of them >> and brought back here to test. I'll know more after we collect graph >> data and submit a ticket with Cambium. >> >> On 9/4/2015 9:05 AM, Ken Hohhof wrote: >> >>> So what's the current status on this? Is it better to upgrade to 13.4, >>> or stay on 13.2? And do you have to upgrade both APs and SMs? >>> >>> And was 13.4 supposed to fix a watchdog reset problem? Or just create a >>> different event log entry for user initiated reboots? >>> >>> Watchdog resets are a big problem, it used to be just gamers and VoIP >>> users, but now everyone bitches if their video stream buffers. Or their >>> smartphone switches to using mobile data, or their webcam has gaps. And >>> it's worse with DFS or LBT. >>> >>> >>> -----Original Message----- From: Mark Radabaugh >>> Sent: Friday, August 28, 2015 9:54 PM >>> To: af@afmug.com >>> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset >>> >>> We have been seeing this across 200+ AP's >>> >>> It's getting truly annoying. Cambium tech support has helpful >>> suggestions like'just put them in free run'. Um.... Thanks for the help, >>> but no. >>> >>> Mark Radabaugh >>> Amplex >>> 27800 Lemoyne, Ste F >>> Millbury, OH 43447 >>> 419-261-5996 >>> >>> On Aug 28, 2015, at 4:56 PM, Brian Sullivan <installe...@foxvalley.net> >>>> wrote: >>>> >>>> Last week we rolled out 13.4 to 450 AP's after testing in-house for a >>>> while. While running 13.2 we would see an AP here or there reboot on >>>> occasion by itself. The only message in the Event Log mentions Watchdog >>>> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 >>>> release notes. >>>> >>>> Since we upgraded the network to 13.4 we are now seeing at least 4 AP's >>>> out there rebooting several times per day. On one of these AP's we are >>>> also seeing SM's (all 17 registered) reboot along with the AP. The site >>>> has UPS backup so I know it's not a power grid problem. I am planning to >>>> roll the affected AP's back to 13.2 this evening. >>>> >>>> Anyone else having Watchdog issues with the 13.4 release? >>>> >>>> ******System Startup****** >>>> System Reset Exception -- Watchdog Reset >>>> Software Version : CANOPY 13.4 AP-DES >>>> Board Type : P12 >>>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 - >>>> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms >>>> FPGA Version : 040715 >>>> FPGA Features : DES, Sched, US/ETSI; >>>> 08/28/2015 : 14:11:42 CST : :Time Set >>>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. >>>> >>>> >>>> >>> >> >> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>