Ditto. On Fri, Sep 4, 2015 at 10:44 AM, Eric Muehleisen <ericm...@gmail.com> wrote:
> +1 Same here. About 20 AP's and 300 SM's all on 13.4. No issues. > > On Fri, Sep 4, 2015 at 11:57 AM, Bill Prince <part15...@gmail.com> wrote: > >> FWIW, we have 13.4 on everything now; FSK, PMP430, and PMP450. We're not >> seeing the watchdog resets. >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 9/4/2015 9:55 AM, Sam Lambie wrote: >> >> Damn that sucks about it not being a fix. I too read the release notes >> too fast. FWIW, installing 13.4 has made for a bit more stable network on >> our 450's. >> >> >> On Fri, Sep 4, 2015 at 10:44 AM, Brian Sullivan < >> installe...@foxvalley.net> wrote: >> >>> I probably read the Release Notes too fast and assumed that it was a >>> fix. I just re-read them and I only see what you do. So it appears that >>> there was no 'bug fix' for this issue. In the Cambium forum, Matt M noted >>> that there may be a Maintenance release to address this. He did not state >>> an ETA. I would assume that us submitting support tickets <shudder> would >>> help them get closer to squashing the bug. >>> >>> On 9/4/2015 10:57 AM, Ken Hohhof wrote: >>> >>>> Brian, is it your understanding that 13.4 was supposed to cure or help >>>> the watchdog resets? I don't see anything in the release notes other than >>>> the log entry for user initiated resets. >>>> >>>> I wish I could detect a pattern or cause-effect relationship which APs >>>> exhibit this and which rarely or never do. >>>> >>>> >>>> -----Original Message----- From: Brian Sullivan >>>> Sent: Friday, September 04, 2015 10:47 AM >>>> To: af@afmug.com >>>> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset >>>> >>>> For us, we rolled back the affected AP's to 13.2 and they are back to >>>> their normal routine (once in a while reboots). I replaced one of them >>>> and brought back here to test. I'll know more after we collect graph >>>> data and submit a ticket with Cambium. >>>> >>>> On 9/4/2015 9:05 AM, Ken Hohhof wrote: >>>> >>>>> So what's the current status on this? Is it better to upgrade to >>>>> 13.4, or stay on 13.2? And do you have to upgrade both APs and SMs? >>>>> >>>>> And was 13.4 supposed to fix a watchdog reset problem? Or just create >>>>> a different event log entry for user initiated reboots? >>>>> >>>>> Watchdog resets are a big problem, it used to be just gamers and VoIP >>>>> users, but now everyone bitches if their video stream buffers. Or their >>>>> smartphone switches to using mobile data, or their webcam has gaps. And >>>>> it's worse with DFS or LBT. >>>>> >>>>> >>>>> -----Original Message----- From: Mark Radabaugh >>>>> Sent: Friday, August 28, 2015 9:54 PM >>>>> To: af@afmug.com >>>>> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset >>>>> >>>>> We have been seeing this across 200+ AP's >>>>> >>>>> It's getting truly annoying. Cambium tech support has helpful >>>>> suggestions like'just put them in free run'. Um.... Thanks for the help, >>>>> but no. >>>>> >>>>> Mark Radabaugh >>>>> Amplex >>>>> 27800 Lemoyne, Ste F >>>>> Millbury, OH 43447 >>>>> 419-261-5996 >>>>> >>>>> On Aug 28, 2015, at 4:56 PM, Brian Sullivan < >>>>>> <installe...@foxvalley.net>installe...@foxvalley.net> wrote: >>>>>> >>>>>> Last week we rolled out 13.4 to 450 AP's after testing in-house for a >>>>>> while. While running 13.2 we would see an AP here or there reboot on >>>>>> occasion by itself. The only message in the Event Log mentions Watchdog >>>>>> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 >>>>>> release notes. >>>>>> >>>>>> Since we upgraded the network to 13.4 we are now seeing at least 4 >>>>>> AP's out there rebooting several times per day. On one of these AP's we >>>>>> are also seeing SM's (all 17 registered) reboot along with the AP. The >>>>>> site has UPS backup so I know it's not a power grid problem. I am >>>>>> planning >>>>>> to roll the affected AP's back to 13.2 this evening. >>>>>> >>>>>> Anyone else having Watchdog issues with the 13.4 release? >>>>>> >>>>>> ******System Startup****** >>>>>> System Reset Exception -- Watchdog Reset >>>>>> Software Version : CANOPY 13.4 AP-DES >>>>>> Board Type : P12 >>>>>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 >>>>>> - 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms >>>>>> FPGA Version : 040715 >>>>>> FPGA Features : DES, Sched, US/ETSI; >>>>>> 08/28/2015 : 14:11:42 CST : :Time Set >>>>>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> >> >> >