You can choose a LBT or DFS secondary channel 2.5mhz away from the primary channel...you don't have choose a secondary that is 20mhz away. Unless of course you are in an area that would trigger a lot of DFS or LBT events.
-sean On Wednesday, September 9, 2015, George Skorup <geo...@cbcast.com> wrote: > Nope, no authentication at all. > > Next time it happens, I will try to get the logs. It's impossible to know > when or where it will strike, so retrieving the SM's side of the logs is > very unlikely while this is occurring. Maybe I can get my house moved over > to a 3.6 450 on Friday or some time next week and wait for it to happen. > > I have never seen this issue on 5GHz or the one lonely 2.4GHz 450 we have > up. Something with the 3.6GHz 450 is just... different. The only thing that > comes to mind is LBT which I understand is modified DFS. Maybe the thing is > that I don't have any alternate frequencies configured on any of the 3.6 > 450 sectors. There's simply no alternate channels to have a sector move to > in a cluster. Many of these are co-located with UBNT 3.65 running in the > lower half of the band while we're migrating customers to the 450. > > On 9/9/2015 10:28 PM, Chitrang Srivastava wrote: > >> Hi George, >> >> For your other issues where SM fails to register and you have to reboot >> AP. >> Please send AP logs , on AP goto 'logs - SM sessions' and then select >> luid of SM which has problem, after submitting you will get the logs, >> >> Further if it is possible to reach SM please get similar logs 'logs - AP >> session ' >> >> We are working on a similar issue but with RADIUS authentication for SM, >> for you SM authentication is radius as well? >> >> Thanks >> Chitrang Srivastava >> ________________________________________ >> From: Af <af-boun...@afmug.com> on behalf of George Skorup < >> geo...@cbcast.com> >> Sent: 29 August 2015 09:30:14 >> To: af@afmug.com >> Subject: Re: [AFMUG] Canopy 13.4 Watchdog Reset >> >> What does FreeRun have to do with it? >> >> I have a couple 450 test sites on 13.4 and haven't seen any watchdog >> resets. Granted, that's only two APs. Definitely still see it on 13.2.1. >> It's not a daily thing, but yeah, annoying. >> >> One thing I'm seeing on the 3.6 450 with 13.2.1 is the APs getting into >> a state where they say there's no sync pulse. Then it says receiving >> sync, no sync... over and over every few seconds until they are >> rebooted. All the while the SyncInjector says nothing is wrong. Tracking >> 8+ sats. No increment for the 1PPS Active counter. I understand this had >> something to do with the FreeRun stuck issue, which was apparently >> resolved with 13.4, but I'm waiting on 13.4.1 so some other issues get >> fixed before I can update the entire network. >> >> Anyway, if I leave the APs alone for a while (say it happens in the >> middle of the night while I'm sleeping), they mysteriously return to >> normal after anywhere from 3 to 20 minutes. Then if any SM loses >> registration (or if I force an SM to rescan), it fails to register for >> no reason at all. Reboot the AP, everything works again. I have no >> freakin idea what this is about. >> >> On 8/28/2015 9:54 PM, Mark Radabaugh wrote: >> >>> We have been seeing this across 200+ AP's >>> >>> It's getting truly annoying. Cambium tech support has helpful >>> suggestions like'just put them in free run'. Um.... Thanks for the help, >>> but no. >>> >>> Mark Radabaugh >>> Amplex >>> 27800 Lemoyne, Ste F >>> Millbury, OH 43447 >>> 419-261-5996 >>> >>> On Aug 28, 2015, at 4:56 PM, Brian Sullivan <installe...@foxvalley.net> >>>> wrote: >>>> >>>> Last week we rolled out 13.4 to 450 AP's after testing in-house for a >>>> while. While running 13.2 we would see an AP here or there reboot on >>>> occasion by itself. The only message in the Event Log mentions Watchdog >>>> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 >>>> release notes. >>>> >>>> Since we upgraded the network to 13.4 we are now seeing at least 4 AP's >>>> out there rebooting several times per day. On one of these AP's we are >>>> also seeing SM's (all 17 registered) reboot along with the AP. The site >>>> has UPS backup so I know it's not a power grid problem. I am planning to >>>> roll the affected AP's back to 13.2 this evening. >>>> >>>> Anyone else having Watchdog issues with the 13.4 release? >>>> >>>> ******System Startup****** >>>> System Reset Exception -- Watchdog Reset >>>> Software Version : CANOPY 13.4 AP-DES >>>> Board Type : P12 >>>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 - >>>> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms >>>> FPGA Version : 040715 >>>> FPGA Features : DES, Sched, US/ETSI; >>>> 08/28/2015 : 14:11:42 CST : :Time Set >>>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. >>>> >>>> >>>> >