It would be nice if they would check for the preferred AP periodically and reconnect to it when it comes back... or even just an AP with a better signal. It's kind of a nuisance to have to go and manually deregister all the SMs, if for example, you reboot an AP and they all jump over to the neighboring sector.
On Mon, Nov 2, 2015 at 5:25 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > Sorry - what Dan said. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Nov 2, 2015 6:24 PM, "Dan Sullivan" < > daniel.sulli...@cambiumnetworks.com> wrote: > >> Hi Nate, >> >> >> >> You can go to the AP to which the SM is currently registered and select >> Monitor -> Wireless. In the list of registered SMs will be your SM. You >> select “Deregister” and the SM will search for an AP again. >> >> >> >> Preferred AP is used when the SM is doing network entry. The SM scans >> and identifies all APs that it sees. Then the SM uses the Preferred AP >> upon the APs found during scanning. >> >> >> >> Dan Sullivan >> >> ePMP Software Manager >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman >> *Sent:* Monday, November 02, 2015 5:17 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] EPMP Rescan >> >> >> >> On monitor wireless click rescan? >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Nov 2, 2015 6:13 PM, "Nate Burke" <n...@blastcomm.com> wrote: >> >> I could just be overlooking it, but is there a way to rescan an EPMP Sm >> if it's associated to the wrong sector? Or is Rebooting the SM or Kicking >> it from the Wrong AP the only way? >> >> Does the 'Preferred AP' Only matter when the radio is initially scanning? >> >>
